این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 6 دی 1404
Polyolefins Journal
، جلد ۶، شماره ۱، صفحات ۱۳-۲۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
چکیده انگلیسی مقاله
The loss of energy especially in industrial and residential buildings is one of the main reasons of increased energy consumption. Improving the thermal insulation properties of materials is a fundamental method for reducing the energy losses. Polymeric foams are introduced as materials with excellent thermal insulation properties for this purpose. In the present study, a deep theoretical investigation is performed on the overall thermal conductivity of low-density polyethylene (LDPE) foams. The thermal conductivity by radiation is predicted using two different methods. The most appropriate model is selected in comparison with experimental results. The results show that the theoretical model has an appropriate agreement with the experimental results. The effects of foam characteristics including foam density, cell size, and cell wall thickness on the overall thermal conductivity are investigated. The results indicate that by decreasing the cell size and increasing the cell wall thickness, the overall thermal conductivity is decreased significantly. Also, there is an optimum foam density in order to achieve the smallest thermal conductivity. The lowest overall thermal conductivity achieved in the studied ranges is 30 mW/mK at foam density of 37.5 kg.m-3, cell size of 100 μm, and cell wall thickness of 6 μm.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
Rezgar Hasanzadeh |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Taher Azdast |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Ali Doniavi |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Richard Eungkee Lee |
Dr. Foam, 33 Silker Street, Vaughan L6A4T4, Ontario, Canada
نشانی اینترنتی
http://poj.ippi.ac.ir/article_1572_48a0e31e7f6462dd90fb01c451b78ce6.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/531/article-531-1148451.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات