این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Nanoscience and Nanotechnology (IJNN)، جلد ۹، شماره ۳، صفحات ۱۵۱-۱۶۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Modeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology
چکیده انگلیسی مقاله In this paper, size distribution of nano-bubbles was measured by the reliable and fast method of laser diffraction technique. Nano-bubbles were produced using a nano-bubble generator designed and made based on hydrodynamic cavitation phenomenon in Venturi tubes. A Central Composite Design with Response Surface Methodology was used to conduct a five factor, five level factorial experimental design on the main process variables including frother concentration, solution temperature, pH, air flow rate and pressure drop in the cavitation tube nozzle. The statistical analysis used to develop a model for predicting the median size of nanobubbles (D50) showed that the frother concentration, solution temperature and air flow rate have the highest effect on the size of nanobubbles. Results demonstrated that with increasing the frother concentration and the air flow rate, the median nanobubble size (D50) decreased. The results also indicated that an addition of 20~ 40°C temperature, increased the median size of the nanobubbles formed in the solution. In the optimum condition, the frother concentration, solution temperature and air flow rate were found to be 69.5 mg/h-1, 20°C and 0.3 Lmin-1, respectively. In this study, the minimum median size of the nanobubbles produced in the laboratory and predicted by the prediction model was 130.75 and 129.83 nm,respectively, which showed that the model results properly fitted with experimental results.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله r احمدی |
mineral processing department, faculty of engineering, tarbiat modares university, tehran, i. r. iran
سازمان اصلی تایید شده: دانشگاه تربیت مدرس (Tarbiat modares university)

a خدادادی دربان | khodadadi darban
civil- environmental engineering, mineral processing department, faculty of engineering, tarbiat modares university, tehran, i. r. iran
سازمان اصلی تایید شده: دانشگاه تربیت مدرس (Tarbiat modares university)

نشانی اینترنتی http://www.ijnnonline.net/article_4012_f2576be4566b28d4a33684cae33b12a6.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات