این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Transportation Engineering، جلد ۳، شماره ۳، صفحات ۲۲۷-۲۳۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigation of Rutting Performance of WMA Mixtures Containing Copper Slag
چکیده انگلیسی مقاله Copper slag (CS) is an abrasive blasting grit made of granulated slag from metal smelting processes. As copper slags are known to be waste material and cause a lot of environmental problems, it would be a good idea to use them in different sections of industry such as pavement construction. On the other hand, in order to save energy and reduce the amount of pollutants released during the construction of asphalt pavements, the technology of Warm Mix Asphalt (WMA) is developing considerably. A very high amount of copper slag is produced in south of Iran where the weather is considered to be hot and rutting is the most important distress of asphalt concretes. This paper presents the influence of utilization of copper slag as fine material on the rutting performance of warm mixed asphalt. A laboratory study has been conducted on five asphalt mixtures with various CS contents, namely; 0%, 10%, 20%, 30% and 40% by weight of total aggregates. The amount of optimum bitumen and the value of Marshall Stability (MS) were determined with MS test for the samples. Then creep test and wheel track tests were conducted on the produced samples. The results indicated that the use of 20% CS in WMA enhances the marshal stability and rutting performance of WMA mixtures. However, the resistance of mixtures against rutting falls substantially by adding more than 20% CS.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله حسن زیاری |
professor, department of civil engineering, iran university of science and technology iust , narmak, tehran, iran
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

علی منیری |
ph.d candidate, department of civil engineering, iran university of science and technology, tehran, iran
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

محمد جواد ایازی | mohamad javad
msc grad., department of civil engineering, iran university of science and technology, tehran, iran
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

مصطفی نخعی |
ph.d candidate, department of civil engineering, iran university of science and technology, tehran, iran
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

نشانی اینترنتی http://www.ijte.ir/article_14775_19f571563ebd191b837e351408bd490b.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات