این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۲۹، شماره ۲، صفحات ۸۵-۱۰۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی CFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces
چکیده انگلیسی مقاله This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated and diluted air combustion (HPDAC) conditions. Although the calculation procedure is a two dimensional one with the vorticity and stream function as the main hydrodynamic variables; its results can yet be also valid for the three dimensional case. Because of the weakness of the standard or other traditional k-ε models in predicting the spreading rate of axisymmetric jets, and also for the sake of economy and lack of boundary conditions, here the turbulent transport properties are obtained from an algebraic formula. An infinitely single-step chemical reaction (physically controlled) and a model known as “four flux” are considered as combustion and radiation models, respectively. The qualitative and quantitative verification of high temperature and low oxygen content air/exhaust gases combustions and conventional (low and high air temperature) combustions results have been checked and compared, respectively, with those reported in the literature. Finally, in this investigation three modified concepts and new formulas have been proposed and used to define the gas temperature uniformity, the chemical flame size and the maximum flame temperature as the HPDAC’S main unique features achievement criteria.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله کیومرث عباسی خزایی | abbasi khazaei
graduate school of the environment and energy, science and research branch, islamic azad university, p.o. box 14155-4933 tehran, i.r. iran
سازمان اصلی تایید شده: دانشگاه آزاد اسلامی علوم و تحقیقات (Islamic azad university science and research branch)

علی اصغر حمیدی | ali asghar
faculty of chemical engineering, tehran university, p.o. box 11155-4563 tehran, i.r. iran
سازمان اصلی تایید شده: دانشگاه تهران (Tehran university)

مسعود رحیمی |
cfd research center, department of chemical engineering, razi university, kermanshah, i.r. iran
سازمان اصلی تایید شده: دانشگاه رازی (Razi university)

نشانی اینترنتی http://www.ijcce.ac.ir/article_6706_0ea1b48ef47d1688e443a62c452c1b17.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات