این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۳، شماره ۱، صفحات ۳۸-۵۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Simulation of Foaming and Deformation for Composite Aluminum Foams
چکیده انگلیسی مقاله In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results showed that simulation data and the virtual metallographic have a good agreement with the metallographic empirical results after solidification. In the second stage, several cubic A356+3wt.%SiC foams were compressed under uni-axial compression load base on ASTM E9 standard. Stress-strain curves of the foams were determined by a data acquisition system with gain 10 samples per second. Then foams plastic deformation behavior simulated based of a new asymptotic function by ABAQUS software. Discretized digital solid-model of the solid bubbles was prepared by using virtual metallographic images which obtained from present code. Then load-displacement curves were plotted for simulation and experimental results. Results show both curves obtained from experimental and simulation have a good agreement with approximately 1.8% error. Therefore present software could be useful tool for predicting of metal foams plastic deformation behavior without experimental try and error.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله حسین بیانی |
department of mining and metallurgical engineering, amirkabir university of technology, tehran, iran
سازمان اصلی تایید شده: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)

سید محمد حسین میرباقری | seyed mohammad hossein
amirkabir university of technology
سازمان اصلی تایید شده: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_3698_c6aef692242b75e2ab97edd4ffaf829a.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات