این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Iranian Journal of Materials Forming
، جلد ۳، شماره ۱، صفحات ۶۵-۷۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation
چکیده انگلیسی مقاله
The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained after 2 passes of SSE, resulted in high SRS index (m-value) of 0.4 at 723 K. The calculated activation energy for 2 passes deformed alloy is 116 kJ/mol which is higher than the activation energy of grain boundary diffusion in magnesium (75 kJ/mol). This higher amount of activation energy can be attributed to the presence of gadolinium in this alloy. This SRS index together with an activation energy of 116 kJ/mol are indicative of a superplastic deformation behavior dominated by grain boundary sliding accommodated by grain boundary diffusion at 723 K.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
نازنین بیات ترک | bayat tork
school of metallurgy and materials engineering, iran university of science and technology
سازمان اصلی تایید شده
: دانشگاه علم و صنعت ایران (Iran university of science and technology)
سید حسین رضوی | seyed hossein
school of metallurgy and materials engineering iran university of science amp;amp;amp; technology
حسن ثقفیان |
school of metallurgy and materials engineering, iran university of science and technology
سازمان اصلی تایید شده
: دانشگاه علم و صنعت ایران (Iran university of science and technology)
رضا محمودی |
school of metallurgical and materials engineering, college of engineering, university of tehran, tehran, iran
سازمان اصلی تایید شده
: دانشگاه تهران (Tehran university)
نشانی اینترنتی
http://ijmf.shirazu.ac.ir/article_3711_96eeccc261b702222eaef85e5380d8e2.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات