این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۱، شماره ۱، صفحات ۵۶-۶۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A comparison between numerical and analytical modeling of ECAP
چکیده انگلیسی مقاله Recent developments in nanostructured products draw considerable attention to ultrafine grained materials. These materials are normally manufactured by different severe plastic deformation (SPD) methods. In the present study, analytical models and finite element method (FEM) are used to calculate strain imposed to a specimen that was deformed by equal channel angular pressing (ECAP). In addition, strain inhomogeneity in term of coefficient of deviation (CV) for an aluminum alloy (AA6101) processed under ECAP was calculated. Dies with 90º, 105º and 120º intersecting angles were modeled based on FEM. Furthermore, the effect of friction on force-displacement curves was investigated using analytical and numerical approaches. Moreover, the energy loss that is due to friction was computed. Strains calculated by FEM for different die angles were identical to those evaluated by analytical models. Based on numerical and analytical models, it has been shown that strain inhomogeneity increases when the angle between two channels decreases.
کلیدواژه‌های انگلیسی مقاله ECAP,Simulation,strain inhomogeneity,friction
نویسندگان مقاله مهرداد آقایی خفری | aghaie khafri
khajenasir university of technology

مرتضی rejaeian |
k.n. toosi university of technology
سازمان اصلی تایید شده: دانشگاه صنعتی خواجه نصیرالدین طوسی (Khajeh nasir toosi university of technology)

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_2280_e3d3c7863f157e60972718f1ebbf1361.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات