این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Science and Engineering، جلد ۱۰، شماره ۲، صفحات ۱-۱۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی INFLUENCE OF HEAT TREATMENT PARAMETERS,TEMPERATURE AND TIME, ON WEAR AND MICROHARDNESS OF NICRBSI FLAME SPRAYED COATINGS APPLIED ON CK45 SUBSTRATES
چکیده انگلیسی مقاله The objectives of this research were to find an economical way of reducing porosities in the microstructure of coatings deposited by flame spraying technique on CK45 steel and also trying to increase their cohesive strength to the substrate, so that the overall wear properties of this type of coating can be improved. So several specimens from this steel coated with NiCrBSi powder under specific conditions were subjected to various furnace heat treatment at 1000, 1025, 1050, 1075 and 1100 °C, each for periods of 5, 10 and 15 minute before cooling them in air. Tribological properties of treated coatings were evaluated by pin on disc method. The results show the highest wear resistance and microhardness values observed in one of the sample was due to lower amount of porosity and higher amount of very fine Cr2Ni3B6 particles precipitated homogeneously throughout its microstructure during specific heat treatment.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله h عربی | h arabi
center of excellence for high temperature alloys technology, iran university of science and technology,

سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

s رستگاری | s rastegari
school of metallurgy and materials engineering, iran university of science and technology, tehran, iran.

سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

v رمضانی | v ramezani
school of metallurgy and materials engineering, iran university of science and technology, tehran, iran.

سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

z والفی | z valefi
school of metallurgy and materials engineering, tehran university, tehran, iran.

سازمان اصلی تایید شده: دانشگاه تهران (Tehran university)

نشانی اینترنتی http://ijmse.iust.ac.ir/browse.php?a_code=A-10-127-16&slc_lang=en&sid=en
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده Research paper
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات