این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Computational and Applied Research in Mechanical Engineering - JCARME، جلد ۴، شماره ۱، صفحات ۴۳-۵۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
چکیده انگلیسی مقاله Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial compression load were investigated both experimentally and numerically and effects of the geometrical and mechanical parameters, such as crack length, crack angle, crack position, plate imperfection, load band, and plate thickness on the critical buckling load were studied. In the experimental study, mechanical properties and plastic behavior of stainless steel plates were determined for the subsequent numerical study. Numerical modeling was carried out by ABAQUS finite element software. Numerical predictions were compared with the experimental results and the reliability of the numerical solution was proven. Results demonstrated the considerable effects of the mentioned parameters on the critical buckling load of plate.
کلیدواژه‌های انگلیسی مقاله Cracked plate,Buckling,Post-buckling,Experimental method,FEM
نویسندگان مقاله m شریعتی |
department of mechanical engineering, ferdowsi university of mashhad, mashhad, iran
سازمان اصلی تایید شده: دانشگاه فردوسی (Ferdowsi university)

علی محمد مجد ثابتی | a m majd sabeti
department of mechanical engineering, shahrood university of technology, shahrood, iran
سازمان اصلی تایید شده: دانشگاه صنعتی شاهرود (Shahrood university of technology)

h قارونی |
department of mechanical engineering, shahrood university of technology, shahrood, iran
سازمان اصلی تایید شده: دانشگاه صنعتی شاهرود (Shahrood university of technology)

نشانی اینترنتی http://jcarme.srttu.edu/article_71_1623213990a4002d2a86d4bd91e58f10.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات