این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۳۷، شماره ۴، صفحات ۲۲۱-۲۳۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Drying of Matricaria recutita Flowers in Vibrofluidized Bed Dryer: Optimization of Drying Conditions Using Response Surface Methodology
چکیده انگلیسی مقاله Drying of Matricaria recutita flower was investigated experimentally in a VibroFluidized Bed Dryer (VFBD). The aim of the present work was to optimize the best operating conditions for the drying of Matricaria recutita flower in the VFBD based on experimental design techniques. Response Surface Methodology (RSM) and Central Composite Design (CCD) based on 4-variable with 5-level have been employed to achieve the desirable possible combinations of frequency of vibration (7-15 Hz), inlet air temperature (36-68 °C), air flow rate (16-24 m3/h), and drying time (30-70 min) for the highest responses in terms of moisture removal (MR) and thermal efficiency (). A full quadratic model was used to describe the effects of individual and interactive parameters on the responses. The analysis of the obtained results showed that the inlet air temperature has the largest effect on responses. The optimal process parameters were as follows: frequency of vibration of 10.88 Hz, inlet air temperature of 64.08 °C, air flow rate of 20.63 m3/h and drying time of 69.11 min in which the predicted value for the MR (%) and  (%) was 86.76 and 53.05, respectively. The proposed optimal conditions were examined in the laboratory and MR (%) and  (%) achieved as 87.12±0.25% and 52.78±0.34%, respectively. The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the drying conditions.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Sahar Zamani |
Processes Intensification Research Lab, Department of Chemical Engineering, Faculty of Engineering, Yasouj University, P.O. Box 75918-74831 Yasouj, I.R. IRAN

Mahmood Reza Rahimi |
Processes Intensification Research Lab, Department of Chemical Engineering, Faculty of Engineering, Yasouj University, P.O. Box 75918-74831 Yasouj, I.R. IRAN

Hossein Sadeghi |
Medicinal Plants Research Center, Yasuj University of Medical Sciences, P.O. Box 75917-41417 Yasuj, I.R. IRAN

نشانی اینترنتی http://www.ijcce.ac.ir/article_28216_749887283e4d4b5ddfde3e925e6a07d4.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/444/article-444-1477089.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات