این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Nanostructures، جلد ۹، شماره ۱، صفحات ۹۴-۱۰۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Synthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)
چکیده انگلیسی مقاله Metal matrix composite (MMC) is engineered combination of the metal (matrix) and hard particle (reinforcement) to get tailored properties. MMCs are either in use or prototyping for the space shuttle, commercial airliners, electronic substrates, automobiles, golf clubs, and a variety of other applications.In this study, carbon nanotubes (CNTs) reinforced aluminum MMCs were synthesized by DPDS for the first time. Planetary ball mill has been used to disperse of CNTs in Al matrix. The effects of the CNTs content and secondary pressing-sintering on properties of the nano-composites were investigated. Mechanical properties of aluminum metal matrix nano-composites samples were characterized using compression and micro-hardness measurements. Enhancements of about 52% in compressive strength and 64% in hardness were observed as compared to pure aluminum (matrix) fabricated under the similar condition by conventional sintering process. The morphology and phase analysis of composites have been studied by SEM, and XRD. This research work shows feasibility of manufacturing CNT reinforced metal composites by DPDS.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Akbar Yarahmadii |
Metallurgy and Materials Engineering Department, Engineering and Technology faculty, Imam Khomeini International University (IKIU), Qazvin, Iran

Masoud Rajabi |
Academic Member at Metallurgy and Materials Engineering Department, Engineering and Technology Faculty, Imam Khomeini International University (IKIU), Qazvin, Iran

Mohammad Talafi Noghani |
Academic Member at Metallurgy and Materials Engineering Department, Engineering and Technology Faculty, Imam Khomeini International University (IKIU), Qazvin, Iran

Reza Taghiabadi |
Academic Member at Metallurgy and Materials Engineering Department, Engineering and Technology Faculty, Imam Khomeini International University (IKIU), Qazvin, Iran

نشانی اینترنتی http://jns.kashanu.ac.ir/article_63679_acb40fb426cf2c2f0439e40393128905.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/497/article-497-1530948.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات