این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 21 آذر 1404
Dental Research Journal
، جلد ۱۴، شماره ۳، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
The effect of surface treatment with a fractional carbon dioxide laser on shear bond strength of resin cement to a lithium disilicate‑based ceramic
چکیده انگلیسی مقاله
Background: This study investigated the impact of different surface treatments, including fractionalcarbon dioxide (CO2) laser on shear bond strength (SBS) of resin cement to lithium disilicate ceramic.Materials and Methods: In this in vitro study, 72 blocks of IPS e.max CAD ceramic were randomlydivided into six groups in terms of treatment (n = 12). Group 1 underwent etching with 9.6%hydrofluoric (HF) acid, whereas group 2 was subjected to air abrasion with aluminum oxide particles.Groups 3 and 4 were treated with a fractional CO2 laser for 10 s using 10 W/14 mJ (group 3) or20 W/10 mJ (group 4). In groups 5 and 6, the CO2 laser was applied similar to that in groups 3 and4, respectively; then, the specimens were etched by HF acid. After silane application, luting cementwas bonded to the specimens. The SBS was assessed with a universal testing machine, and the typeof bond failure was determined. Data were analyzed by ANOVA, Duncan, and Fisher's exact tests.Results: Surface conditioning with fractional CO2 laser alone resulted in significantly lower SBSthan HF acid treatment (P < 0.05). Bond strengths of the specimens treated with a combination oflaser irradiation and acid etching were significantly greater than all the other groups (P < 0.05). Nosignificant difference was found in the distribution of failure modes among the groups (P = 0.337).Conclusion: The combination of fractional CO2 laser irradiation and HF acid etching could berecommended when extra retention is required for lithium disilicate‑based restorations, whereaslaser treatment alone cannot produce sufficient SBS.Key Words: Bond strength, carbon dioxide laser, ceramics, laser treatment, lithium disilicate
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
| Farzaneh Ahrari
| Alireza Boruziniat
| Hamideh Sadat Mohammadipour
| Mehrnoosh Alirezaei
نشانی اینترنتی
http://drj.mui.ac.ir/index.php/drj/article/view/1884
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/171/article-171-1956161.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
Original Article(s)
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات