این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
علوم و تکنولوژی پلیمر، جلد ۲۴، شماره ۳، صفحات ۱۷۱-۱۷۹
عنوان فارسی تقویت اتصالات برشی دوگانه پیچ و مهره در سازه های چوبی با استفاده از صفحات GFRP
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods
چکیده انگلیسی مقاله Failure in timber structures occurs mainly in crucial points such as joints areas. Therefore, the idea of using composite sheets in timber joints has been intro-duced as a method in order to increase the strength and ductility behaviour of timber joints. This research aims to study the behaviour of bolted joints in poplar and pine woods, which are reinforced by two types of GFRP sheets. A single shear bolted joint consisted of 3 timber members whose length and width were 30 cm in length and 5 cm in width. The thickness of each member was 4 cm for internal part and 2 cm for external part. The employed steel bolt was 10 cm in length and 1 cm in diameter. In this respect, one layer of GFRP sheet was used to be bonded to timber members by using epoxy resin and left between the clamps for 24 hours. They were then kept at room temperature for three weeks. Also the effect of adding a wood veneer on the reinforced joints was investigated. The tensile strength of the reinforced and control samples (un-reinforced joints) was measured according to ASTM D5652-92 standard. The results show that the reinforced samples have higher tensile strength compared to that of reinforced joints, although it is not statistically signifcant. Also, two types of sheets infuence the joint behaviour as the reinforced joints display more ductility behaviour.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله محراب مدهوشی |


سحر سادات زاده | sadat zadeh


قنبر ابراهیمی |


نشانی اینترنتی http://jips.ippi.ac.ir/article_588_270.html
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/968/article-968-197277.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات