این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
علوم و تکنولوژی پلیمر، جلد ۲۴، شماره ۳، صفحات ۲۱۵-۲۳۰
عنوان فارسی مقایسه رفتار شیمی- فیزیکی و رئولوژیکی پلیمرهای تجاری بهبوددهنده شاخص گرانروی مصرفی در صنعت روغن موتور
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Physical Chemistry and Rheological Behavior of Commercial Polymers of Viscosity Index Improver Used in Motor Oil Industry
چکیده انگلیسی مقاله Nowdays, production of high quality engine oils is one of the worries of our country’s engine oil industry. In this study, the behavior of four commercial polymers used in nation motor oil industry in obtaining the best viscosity index improver was investigated. In this regard, viscometric behavior, shear stability and polymers’ performance for engine cranking were compared at low temperature. In this respect, viscometry behavior of polymer solutions with different concentrations (0.3, 0.5, 0.7 and 1% by weight) in terms of physical chemistry parameters such as specifc viscosity, intrinsic viscosity, viscosity ratio, thickening power and viscosity index were compared with each other. The activation energy of each polymer solution was calculated using the Arrhenius equation and polymer performance was evaluated with respect to activation energy changes and lower oil temperature sensitivity. In continuation, the shear stability of these commercial polymers in solution state was evaluated. Based on shear stability analysis an inverse relationship was found between polymers’ shear stability and their molecular weights. Finally, the behavior of the commercial polymers was investigated for determination of optimum performance in engine cranking at-15°C. Based on the obtained data, the most suitable polymer was identifed and indicated as the best to fulfl oil industry’s purposes. In this respect the high-tech polymers, based on their molecular structures demonstrate the best performance compared to other polymers. Paratone and Viscotech polymers have relatively shown similar behaviors, although based on viscometric behavior the Viscotech is better than Paratone, and based on shear behavior the order of preference is reversed. Keltan polymer has just a better thickening power while, it is not considered suitable for high quality engine oil at low temperatures of engine cranking for its weak shear performance and low effciency.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله هدایت اله صادقی قاری | sadeghi ghari


زهرا شکوری |


نشانی اینترنتی http://jips.ippi.ac.ir/article_592_270.html
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/968/article-968-197281.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات