این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۱، شماره ۱۱، صفحات ۱۸۸۳-۱۸۹۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations
چکیده انگلیسی مقاله In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in which its temperature, independent of the peripheral gas pressure, remains constant throughout it. The total power consumption of the designed scheme is 430 times less than the conventional type. The electrical, thermal, mechanical, ionization collisions and elastic collisions have been performed using COMSOL5 program, and the output data from COMSOL were analyzed by MATLAB. The simulation results have been employed in implementation of cathode and other parts’ dimensions and based on these results the sensitivity factor of 0.2 1/torr was obtained.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله S. Mohammadzadeh Bazarchi |
University of Urmia, Faculty of Electrical and Computer Engineering, Electronic department, Urmia, Iran

E. Abbaspour Sani |
University of Urmia, Faculty of Electrical and Computer Engineering, Electronic department, Urmia, Iran

نشانی اینترنتی http://www.ije.ir/article_82244_db321d6850b2adc9dec823c045de8ac0.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061711.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات