این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۰، شماره ۷، صفحات ۱۰۴۸-۱۰۵۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel
چکیده انگلیسی مقاله Stent is a metal mesh tube for opening the obstructed vessels of the body. Ni-Ti alloy is a suitable metal for fabrication of stent due to its potential for applying the appropriate stress and strain to the vessel walls. In this study, super-elastic Nitinol wire was used to build stent samples usable to open femoral vessel. Ageing was performed at 500°C for different periods of time to determine the most appropriate transformation temperatures and shape memory/superelasticity behavior of the sample. Mechanical and structural properties of the alloy were determined by differential scanning calorimetry (DSC), electron probe micro analysis (EPMA) and metallographic studies. Ability to stand vessel wall pressure was studied by crush test. Images of scanning electron microscope (SEM) showed that the surface integrity was not affected by strain. The artificial silicon vessel in Simulated Body Fluid (SBF) at 37°C was used for implanting of the crimped stent. The recovery of strain and exertion of stress to the vessel wall was investigated after removal of the stent from the catheter.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Sidra Noruzi |
Department of Biomedical Engineering, Science and Research Branch, Islamic Azad Universi

S.K. Sadrnezhaad |
Materials Science and Engineering, Sharif University of Technology

نشانی اینترنتی http://www.ije.ir/article_72978_d48df460793ba9e5db33834df74a6951.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062062.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات