این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۲۹، شماره ۱۰، صفحات ۱۴۵۰-۱۴۵۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental Analysis of Heat Transfer and Friction Factor in Plate Heat Exchanger with Different Orientations Using Al2O3 Nanofluids
چکیده انگلیسی مقاله Experimental investigations has been done to find out the heat transfer characteristics and friction factor of water based Al2O3 nanofluids as a coolant in brazed plate heat exchanger. Plate heat exchanger either use horizontally or vertically. The base plate of the plate heat exchanger was kept inclined at (0⁰, 30⁰ ,60⁰, 90⁰). The experimentation have been done on the two different concentration of the nanofluids (0.1 v/v% and 0.2 v/v%). It was observed that the heat trasnfer characterstics improves with increase in Reynolds number. It has been studied that nanofluids in a plate heat exchanger has maximum of 34% heat transfer rate over the base fluid. It has been observed that from horizontal to vertical heat transfer rate decreases with increase in Reynolds number. Results shows that there is (10-15) % has been found out when the base plate of plate heat exchanger made inclined from horizontal to 30⁰ of inclination. 
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله GURPREET SINGH |
Mechanical Engineering, Chandigarh University

Prashant . |
Mechanical Engineering Department, Chandigarh University

نشانی اینترنتی http://www.ije.ir/article_72815_7d09e4acd8587e16289d27d682d4aba4.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062232.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات