این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۲۷، شماره ۷، صفحات ۱۰۵۱-۱۰۶۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Zone-3 Impadance Reach Setting of Distance Relays by Including In-feed Current Effects in an Adaptive Scheme
چکیده انگلیسی مقاله The undesired operation of zone 3 may be one of the most conspicuous protective relay features due to the incorrect zone 3 relay operations which have been conducive to the severity of blackouts. Therefore, determining the accurate zone 3 setting of the distance relay is deemed to be necessary. This paper focuses on the development of a new technique for calculating zone-3 setting of distance relays. The proposed technique utilizes impedance seen by distance relays in order to compute zone-3 setting of the relays when faults are modeled on the reach of zone-2 of primary distance relays for the maximum and minimum generation outputs of the power system. The new technique is also improved to be used in an adaptive protection system. The technique and its adaptive version are applied to the IEEE 30-bus test system under different operating circumstances to reveal its robust performance. System simulation studies show that the proposed scheme is able to increase the reach of zone-3 relays without causing mis-coordination problems. Therefore, the two main requirements of the protection system, namely security (without causing coordination) and simultaneity, would be satisfied.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Mehdi Azari |
Electerical Engineering, University of Zanjan

نشانی اینترنتی http://www.ije.ir/article_72338_48ac7bcf7a6f42f3eb77d0d1a9d9ce11.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062689.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات