این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
International Journal of Engineering
، جلد ۲۶، شماره ۱۲، صفحات ۱۵۳۵-۱۵۴۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Modelling and Optimization of Toroidal Continuously Variable Transmission in ECE Driving Cycle
چکیده انگلیسی مقاله
In the present study, the aim is to optimize full and half toroidal continuously variable transmission (CVT) in order to minimize the vehicle fuel consumption (FC) in ECE driving cycle. First, the model of both CVTs’ efficiency is presented. The control strategy of CVTs speed ratio based on minimizing the vehicle FC is introduced, and the algorithm of calculating the vehicle FC is shown. Afterwards, both types of CVT are optimized using Particle Swarm Optimization method (PSO) with the aim of minimizing the vehicle FC in ECE driving cycle, and the optimized geometries are achieved. It is found that a remarkable fuel economy can be achieved through optimization of both types. The effects of the vehicle weight on the optimized geometries are examined. It will be shown that, the optimized geometry of full toroidal type isn’t strongly influenced by the vehicle weight, while the optimized geometry of half toroidal one varies through variation of the vehicle weight.In the present study, the aim is to optimize full and half toroidal continuously variable transmission (CVT) in order to minimize the vehicle fuel consumption (FC) in ECE driving cycle. First, the model of both CVTs’ efficiency is presented. The control strategy of CVTs speed ratio based on minimizing the vehicle FC is introduced, and the algorithm of calculating the vehicle FC is shown. Afterwards, both types of CVT are optimized using Particle Swarm Optimization method (PSO) with the aim of minimizing the vehicle FC in ECE driving cycle, and the optimized geometries are achieved. It is found that a remarkable fuel economy can be achieved through optimization of both types. The effects of the vehicle weight on the optimized geometries are examined. It will be shown that, the optimized geometry of full toroidal type isn’t strongly influenced by the vehicle weight, while the optimized geometry of half toroidal one varies through variation of the vehicle weight.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
Mahmoud Saadat Foumani |
, Sharif University of Technology
نشانی اینترنتی
http://www.ije.ir/article_72224_63cf9ad2b441ce5c1483a16dbb590032.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062823.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات