این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 27 آذر 1404
مهندسی عمران مدرس
، جلد ۱۹، شماره ۵، صفحات ۰-۰
عنوان فارسی
بررسی آزمایشگاهی و عددی تاثیر شکل های مختلف دماغه بر هیدرولیک و ساختار جریان سرریز های کلید پیانویی مستطیل
چکیده فارسی مقاله
در این تحقیق هیدرولیک و ساختار جریان بر روی سرریزهای کلید پیانویی مستطیلی با ارتفاعهای مختلف، در دو حالت بدون دماغه و با وجود دماغه با شکلهای مختلف با روش آزمایشگاهی و مدلسازی عددی سهبعدی، مطالعه شده است. آزمایشها در یک فلوم به عرض یک متر انجام شده و مدل سرریزها با استفاده از صفحات PVC با سه ارتفاع مختلف به نحوی ساخته شده است که نسبت طول توسعهیافته تاج به عرض کانال در تمامی آنها برابر پنج باشد. ابتدا منحنی ضریب آبگذری برای محدوده گستردهای از نسبت هد به ارتفاع برای سه ارتفاع مختلف سرریز تعیین و سپس تأثیر سه هندسه از دماغه با شکلهای مثلث، دایره و بیضی بر بهبود ضریب آبگذری سرریز با ارتفاعهای مختلف بررسیشده است. در این پژوهش بازه انتخابشده برای نسبت هد به ارتفاع همخوانی مناسبی با نسبت مذکور در طراحی سرریز کلید پیانویی سدهای موجود دارد. بر اساس نتایج حاصله، ضریب آبگذری با افزایش ارتفاع سرریز تا مقدار خاصی افزایشیافته و دماغههای مثلثی بزرگ و بیضی تأثیر قابلملاحظهای بر بهبود عملکرد هیدرولیکی سرریزها دارند. تأثیر اصلی دماغه در اصلاح توزیع خطوط جریان بر روی تاج جانبی سرریز در ناحیه پاییندست این تاج میباشد.
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Experimental and Numerical Investigation on Effects of Different Fillet Shapes on Hydraulics and Flow Structure over the Rectangular Piano Key weirs
چکیده انگلیسی مقاله
In this paper hydraulics and flow structure over the rectangular piano key weirs with different heights have been studied experimentally and numerically and effects of different fillet shapes on hydraulic performance are investigated. Experiments are conducted in a one meter width flume. Models of the tested weirs are made from PVC Plates in 3 different heights and with the same L/W ratios equal to 5. Discharge coefficient curve for wide range of heads over height ratio for 3 different weir heights are determined and effect of triangular, half round and oval fillets on increasing of discharge coefficient are investigated. In this research, the chosen range for ratio of head over height is in good agreement with ratio which has been used to design of prototype weirs. Large triangular and oval shaped fillets have significant effects on improvement of performance of the piano key weirs. Main effect of fillets is more uniformly distribution of the flow streamlines over the downstream part of the side crest. In second part of this paper, one and half-key piano key weirs with oval noses and without any nose (net) have been numerically modeled using Flow-3D model. Discharge coefficients of one of the numerically simulated rectangular models is compared with derived discharge coefficient curve from physical model. Convergence of inflow and outflow of numerical model has been controlled. Satisfactory correspondence presents between the experimental and numerical studies. Discharge distribution over the crest of the normal PKW and the weir equipped with oval fillet are compared. Result showed that due to uniformly distribution of the streamlines, the fillet notably increases flow rate at the downstream part of the side crest. Results of numerical simulations are exported to Tecplot software, in order to visualize the flow streamlines at different parts of the studied weirs. The weir with oval fillet affects the flow streamlines in three positions: the near bead streamlines of the weir with oval fillet, have less lateral diversion when they reach beneath the overhang of the outlet keys. In other word, streamlines pass this region more smoothly rather than normal PKW. As a result, the fillet decreases the local head loss, when the flow enters the inlet keys. Streamlines of the mid depth level show less contraction at the entrance and middle of the inlet keys. Consequently, lower velocity of the flow along the inlet keys, helps to more evacuation of the flow from side crests. Finally, streamlines release more uniformly from downstream part of the side crest. These phenomena results low submergence level at the middle of the outlet keys. The outlet keys are the brake of nonlinear weirs. By decreasing the submergence level of the outlet keys, flow from the side crests discharge more freely from inlet to the outlet keys.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
اکبر | akbar safarzadeh
uma
محقق اردبیلی
سیامک خیاط رستمی | siamak khayyatrostami
uma
محقق اردبیلی
بابک خیاط رستمی | babak khayat rostami
arrw
آب منطقه ای اردبیل
نشانی اینترنتی
http://journals.modares.ac.ir/browse.php?a_code=A-10-13362-5&slc_lang=fa&sid=16
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/1242/article-1242-2174770.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
پژوهشی اصیل (کامل)
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات