این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
مهندسی عمران مدرس
، جلد ۱۵، شماره ۲، صفحات ۱-۱۲
عنوان فارسی
تأثیر توأم نانوسیلیس و میکروسیلیس بر دوام بتنهای با مقاومت بالا در برابر تهاجم اسید سولفوریک
چکیده فارسی مقاله
بتن به دلیل فراوانی مصالح، سازگاری با محیط زیست، مقاومت فشاری و دوام بالا و ارزان بودن یکی از پرکاربردترین مصالح ساختمانی میباشد که در برخی موارد عمر مفید آن در محیط های خورنده مانند تهاجم اسیدها به شدت کاهش می یابد. در این تحقیق، دوام بتن های حاوی میکروسیلیس، نانوسیلیس و پودر کوارتز در برابر تهاجم اسید سولفوریک مورد بررسی قرار گرفته است. با بکارگیری چهار طرح اختلاط مختلف حاوی نانوسیلیس، میکروسیلیس و پودر کوارتز به عنوان فیلر سیمان، نمونه های بتنی ساخته شده و جهت دستیابی به مقادیر بهینه مورد آزمایش های مختلف قرار گرفتند. نتایج حاکی از ارتباط مستقیم بین درصد جذب آب 90 روزه و دوام نمونه ها در برابر تهاجم اسید سولفوریک می باشد. استفاده از میکروسیلیس و نانوسیلیس دوام نمونه ها را در برابر تهاجم اسید سولفوریک بهبود می بخشد. اما ترکیب 8 درصد میکرو سیلیس، 2 درصد نانوسیلیس و 25 درصد فیلر سیمان دارای بهترین مقاومت در برابر تهاجم اسید سولفوریک میباشد.
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Effect of Nano-SiO2 and Silica Fume on Durability of High Strength Concretes under Sulfuric Acid Attack
چکیده انگلیسی مقاله
Concrete is one of the most practical and durable construction materials due to economic aspects, abundance of the constituents, adaptability with the environment and its high compressive strength and durabity. High strength concretes are used in the most substructure constructions such as bridges, dams, towers, silos and etc. . The selection of proper aggregates and the constituents affects on the concrete properties such as strength, permeability, and durability. Therefore, optimization of mix designs is necessary to produce high strength and low permeability concretes. Although most of the concrete structures are constructed for 50 years sevice life, however, some of them are sometimes damaged due to sulfuric acid attack. The rate of concrete corrosion in sulfuric acid is a process of dissolution, sedimentation and leaching depends on the chemical compounds of cement, paste reactivity, aggregates type and their grading curves and the proportion of concrete components. Moreover, wetting and drying cycles increases the acid penetration and consequently the rate of corrosion. Remarkable concrete damages have been reported in Australia, Japan, the countries around Persian Gulf, Germany, South Africa and U.S.A.. Therefore, It will be necessary to repair or replace the damaged structure after the attack and it would be very expensive and creates many social problems. Nevetheless, several reports have been published to investigate plain concretes durability in acidic environments, but first, the results are paradoxical for example, silica fume effect against sulfuric acid attack and second, their studies have been conducted on the native construction materials such as fly ash or blast furnace slag. Therefore, it seems necessary to investigate concrete durability against sulfuric acid attack by using new materials such as nano-SiO2. In the present study, durability of concretes containing silica fume, nano-SiO2 and ultra fine Quartz powder was investigated under sulfuric acid attack. Concrete samples of four mix designs, including Silica Fume, nano-SiO2 and ultra fine Quartz powder as cement filler, were investigated to find optimum content of Silica Fume and nano-SiO2. Also to obtain a high strength concretes, ideal grading curve of aggregates and cementitious materials were used which lead to decrease cement consumption. Results show that the very low porosity concretes were obtained based on water absorption test results in comparison to plain concretes. Also, the 28 days compressive strength of all mixtures were obtaied more than 500 kg/cm2 using no more than 325 kg/m3 cementitious material content. Moreover, the durability of concretes against sulfuric acid attack, which is increased by silica fume and nano-SiO2, directly related to the 90 days water absorption. In addition, After 6 months of immersion in sulfuric acid solution with pH of 1.0, the mixture containing 8% silica fume, 2% nano-SiO2 and 25% ultra fine Quartz powder showed the best performance.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
حمید رحمانی |
عضو هیئت علمی - دانشگاه یاسوج
سازمان اصلی تایید شده
: دانشگاه یاسوج (Yasouj university)
محسن جوکار |
دانشجوی کارشناسی ارشد دانشگاه یاسوج
سازمان اصلی تایید شده
: دانشگاه یاسوج (Yasouj university)
محمد پروین نیا | parvin nia
هیئت علمی- دانشگاه یاسوج
سازمان اصلی تایید شده
: دانشگاه یاسوج (Yasouj university)
نشانی اینترنتی
http://mcej.modares.ac.ir/article_12842_9f078055d9c4e9b5e4535ccf09483ff5.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/1242/article-1242-225416.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات