این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
فیزیک زمین و فضا، جلد ۴۵، شماره ۴، صفحات ۸۹-۹۸
عنوان فارسی Geothermal Potential Assesment of Way Ratai Area Based on Thermal Conductivity Measurement to Measure Thermal Properties of Rocks
چکیده فارسی مقاله Thermal conductivity measurements have been used for the Way Ratai geothermal prospect area. The thermal conductivity method is used to evaluate the ability of a rock to deliver heat by conduction. In the area, many surface manifestations are scattered in various regions, where hot springs dominate these various manifestations. The thermal conductivity mapping of rocks is carried out around geothermal manifestations by making a hole as deep as 1 m to insert the stick of conductivity meter. The result of thermal conductivity measurement method is data of k (thermal conductivity), Rt (thermal resistivity), and T (temperature). The measured value of conductivity data in the geothermal field is valued between 0.056 and 0.664 W/mK, thermal resistivity between 1.344 and 17.527 mK/W, and the temperature between 22.7 and 52.6°C. The difference in the value of thermal conductivity rock is influenced by several factors: existing geological structures in the field such as normal faults and lineaments, presence of alteration, and the manifestation zone of hot water or hot vapor that caused by fumaroles.
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Geothermal Potential Assesment of Way Ratai Area Based on Thermal Conductivity Measurement to Measure Thermal Properties of Rocks
چکیده انگلیسی مقاله Thermal conductivity measurements have been used for the Way Ratai geothermal prospect area. The thermal conductivity method is used to evaluate the ability of a rock to deliver heat by conduction. In the area, many surface manifestations are scattered in various regions, where hot springs dominate these various manifestations. The thermal conductivity mapping of rocks is carried out around geothermal manifestations by making a hole as deep as 1 m to insert the stick of conductivity meter. The result of thermal conductivity measurement method is data of k (thermal conductivity), Rt (thermal resistivity), and T (temperature). The measured value of conductivity data in the geothermal field is valued between 0.056 and 0.664 W/mK, thermal resistivity between 1.344 and 17.527 mK/W, and the temperature between 22.7 and 52.6°C. The difference in the value of thermal conductivity rock is influenced by several factors: existing geological structures in the field such as normal faults and lineaments, presence of alteration, and the manifestation zone of hot water or hot vapor that caused by fumaroles.
کلیدواژه‌های انگلیسی مقاله Thermal conductivity, temperature, Geothermal, geology, Way Ratai
نویسندگان مقاله Karyanto Karyanto |
Ph.D. Student, Doctoral Program of Mathematics and Natural Science, Faculty of Mathematics and Natural Science, University of Lampung, Lampung, Indonesia Associate Professor, Department of Geophysical Engineering, Faculty of Engineering, University of Lampung, Lampung, Indonesia

Nandi Haerudin |
Associate Professor, Department of Geophysical Engineering, Faculty of Engineering, University of Lampung, Lampung, Indonesia

Rahmi Mulyasari |
Lecturer, Department of Geophysical Engineering, Faculty of Engineering, University of Lampung, Lampung, Indonesia

Suharno Suharno |
Professor, Department of Geophysical Engineering, Faculty of Engineering, University of Lampung, Lampung, Indonesia

Posman Manurung |
Professor, Department of Physics, Faculty of Mathematics and Natural Science, University of Lampung, Lampung, Indonesia

نشانی اینترنتی https://jesphys.ut.ac.ir/article_74724_963deda3d07486a75269d56cb7814fc1.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/1035/article-1035-2277876.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات