این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۷، شماره ۱، صفحات ۸۴-۹۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
چکیده انگلیسی مقاله In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model was used to evaluate the experimental data. The as-homogenized microstructure illustrated only austenite with a high fraction of annealing twins, and austenite to martensite phase transformation was not observed after quenching at a high temperature and also until high thickness reduction. Avrami exponent was decreased from 0.76 to 0.42, with increasing the annealing temperature from 750 to 830°C. The activation energy value was determined to be ~175 kJ/mol, which was slightly higher than the diffusion activation energy of carbon in austenite.
کلیدواژه‌های انگلیسی مقاله Fe-Mn-Al-C steel, recrystallization kinetics, JMAK model
نویسندگان مقاله M. A. Sohrabizadeh |
Department of Materials Engineering, Bu-Ali Sina University, Hamedan, Iran

Y. Mazaheri |
Department of Materials Engineering, Bu-Ali Sina University, Hamedan, Iran

M. Sheikhi |
Department of Materials Engineering, Bu-Ali Sina University, Hamedan, Iran

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_5640_ae16201113a6aebc30480650c5647c02.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/453/article-453-2407523.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات