این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۷، شماره ۱، صفحات ۱۰۰-۱۱۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach
چکیده انگلیسی مقاله Coating plays a significant role in surface engineering, which leads to the improvement of the mechanical and metallurgical properties of products. It also brings about economic benefits thanks to the cost savings of the improved properties of the surface of a product in particular. Friction surfacing is a relatively new way to create a homogeneous, fine-grained coating with amended resistance to wear and corrosion. In this study, the deposition of Al7075-T6 coating on Al2024-T351 substrates is investigated. Response surface methodology is implemented to study the effects of the rotational speed, axial force, and feed rate on the mechanical properties and microstructure of the specimens. Coating width, coating thickness, ultimate tensile strength, and grain size of coating are considered as the output responses. The input parameters are optimized to attain a wider and thicker coating with higher ultimate tensile strength and of course smaller grain size. Results display the joining of two materials without any porosity at the interface. Moreover, an entirely fine-grained homogeneous microstructure of the deposition is observed. Furthermore, the average grain size of the deposition is diminished by 65% compared to the consumable rod.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله A. Mostafapour |
Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Tabriz, Iran

M. Moradi |
Department of Mechanical Engineering, Faculty of Engineering, Malayer University, Malayer, Iran

H. Kamali |
Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Maragheh, Iran

M. Saleh Meiabadi |
Department of Mechanical Engineering, École de technologie supérieure, Canada 1100 Notre-Dame West, Montreal, Canada

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_5642_9860a147f8b68515cb29183e0fb581cd.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/453/article-453-2407525.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات