این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Science and Engineering، جلد ۱۷، شماره ۲، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Theoretical Investigation and Optimization of Radiation Thermal Conduction of Thermal-Insulation Polyolefin Foams
چکیده انگلیسی مقاله Heat transfer in foams consists of conduction through solid and gaseous phases, convection within the cells as well as radiation through the whole medium. Radiation thermal conduction affects the overall thermal conductivity by 40% in a high porosity. Therefore, the investigation of that term seems to be necessary. Radiation thermal conduction depends on the extinction coefficient which its determination is experimentally complex. In this study, this coefficient is theoretically estimated using Glicksman model for polyolefin foams and is verified in comparison with the experimental data. Extinction coefficient which plays an effective role in the radiation thermal conduction depends on the morphological properties including foam and solid densities, cell and strut diameters. The results demonstrate that the radiation thermal conduction decreases by reducing cell size and increasing foam density and strut diameter. An L25 orthogonal array of Taguchi approach is used for optimization of radiation thermal conduction respect to foam density, cell and strut diameters as variable parameters. The analysis of variance results illuminate that foam density and cell diameter with 58 and 32% contribution are the most effective parameters on the radiation thermal conduction, respectively. At optimum conditions according to the prediction tool of Taguchi approach, the radiation thermal conduction significantly decreases to 1.0908 mW/mK.
کلیدواژه‌های انگلیسی مقاله Insulating foams,Polyolefin,Radiation,Taguchi approach
نویسندگان مقاله | R. Hasanzadeh
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran


| S. Fathi
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran


| T. Azdast
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran


| M. Rostami
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
نشانی اینترنتی http://ijmse.iust.ac.ir/browse.php?a_code=A-10-1217-4&slc_lang=en&sid=1
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/454/article-454-2411317.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده گروه مهندسی مواد . مباحث ویژه
نوع مقاله منتشر شده Research paper
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات