این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۲۱، شماره ۳، صفحات ۲۶۷-۲۷۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی The Causes of Local Hardness Increasing in Powerplant Rotors and its Modification by Tempering (TECHNICAL NOTE)
چکیده انگلیسی مقاله Local hardness increasing on the surface of the power plant rotor may result in severe damages. One major solution for rapid repairing of the rotors is the adaptive tempering heat treatment. For this purpose, after identification of the damaged rotor, initial investigations and tests (such as visual inspection, chemical analysis, nondestructive hardness measurements and replica or on-site metallographic tests) were performed on the rotor journal. The results showed that, the occurrence of local phase transformation (i.e. tempered bainite to austenite and finally martensite) is the main factor. Finally, based on the aforementioned results, tempering heat treatment method was selected as a modifying solution for the following purposes: 1. Decreasing hardness in embrittled places (i.e. 400-690 HV) and, 2. invariable or admissible decrease of hardness in undamaged areas (250-300 HV). Experiments showed that by choosing the 680˚C/4hr as an optimum condition for tempering heat treatment, the two mentioned objectives can be met.
کلیدواژه‌های انگلیسی مقاله Hardness, Power Plant Rotors, Tempering Heat Treatment
نویسندگان مقاله A.R. Razavi |
Research and Laboratories, Iran Power Plant Repair Company

Esmaeil Poursaeidi |
Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran

نشانی اینترنتی http://www.ije.ir/article_71726_1507d46be2ca0458694c85395ee67976.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2422146.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات