این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
دوشنبه 24 آذر 1404
Journal of Theoretical and Applied Vibration and Acoustics
، جلد ۵، شماره ۲، صفحات ۱۱۵-۱۳۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process
چکیده انگلیسی مقاله
Experimental examination of the gyroscopic and rotary inertia effects on the chatter boundary in a milling operation is the chief aim of this article. The equations of motion of the tool vibration are derived based on Timoshenko beam theory and Hamilton principle by considering gyroscopic moment, rotary inertia, velocity-dependent process damping and radial immersion effect. For a range of depth of cuts and spindle velocities, the stability of the milling process is determined by using the method of multiple scales and creating a so-called stability lobe diagram (SLD) in which boundaries separate stable area and unstable or chatter area. Then the newly obtained SLD with the effects of rotary inertia and gyroscopic moments is verified experimentally. Indeed, the verification of the lobes at the speeds where the distinction is sound between the conventional lobes and the newly obtained lobes is presented. Here, the SLD obtained without the effects of rotary inertia and gyroscopic moments is so-called conventional SLD. For this purpose, some experiments are conducted to demonstrate the progressive move into the unstable zone at the locally optimum point of SLD. Finally, a parametric study is presented as a validation of the newly obtained lobes from the sense that the effects of different parameters on these limits are as expected.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
Ali Mokhtari |
PhD Candidate, Department of Mechanical Engineering, Yazd University, Yazd, Iran
Mohammad Mahdi Jalili |
Associate Professor, Department of Mechanical Engineering, Yazd University, Yazd, Iran
Abbas Mazidi |
Assistant Professor, Department of Mechanical Engineering, Yazd University, Yazd, Iran
نشانی اینترنتی
http://tava.isav.ir/article_39849_b8cd671fe4d9fd469986ee60808f9f6b.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/523/article-523-2444929.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات