این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
The Archives of Bone and Joint Surgery، جلد ۸، شماره ۶، صفحات ۶۸۲-۶۸۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Design and Fabrication of a Drop Tower Testing Apparatus to Investigate the Impact Behavior of Spinal Motion Segments
چکیده انگلیسی مقاله Background: The vertebral column is the second most common fracture site in individuals with high-grade osteoporosis(30–50%). Most of these fractures are caused by falls. This information reveals the importance of considering impactloading conditions of spinal motion segments, while no commercial apparatus is available for this purpose. Therefore,the goal was set to fabricate an impact testing device for the measurement of impact behavior of the biological tissues.Methods: In the present study, first, a drop-weight impact testing apparatus was designed and fabricated to record bothforce and displacement at a sample rate of 100 kHz. A load cell was placed under the sample, and an accelerometerwas located on the impactor. Previous devices have mostly measured the force and not the deformation. Thereafter,the effect of high axial compression load was investigated on a biological sample, i.e., the lumbar motion segment, wasinvestigated. To this end, nine ovine segments subjected to vertical impact load were examined using the fabricateddevice, and the mechanical properties of the lumbar segments were extracted and later compared with quasi-staticloading results.Results: The results indicated that the specimen stiffness and failure energy in impact loading were higher than thosein the quasi-static loading. In terms of the damage site, fracture mainly occurred in the body of the vertebra duringimpact loading; although, during quasi-static loading, the fracture took place in the endplates.Conclusion: The present study introduces an inexpensive drop-test device capable of recording both the force andthe deformation of the biological specimens when subjected to high-speed impacts. The mechanical properties of thespinal segments have also been extracted and compared with quasi-static loading results.Level of evidence: V
کلیدواژه‌های انگلیسی مقاله Drop-weight impact machine, Fracture, Impact loading, Spinal motion segment
نویسندگان مقاله | Saeid Kamal
Biomechanical Engineering Group, Biomedical Engineering Department, Amirkabir University of Technology, Tehran, Iran


| Ata Hashemi
Biomechanical Engineering Group, Biomedical Engineering Department, Amirkabir University of Technology, Tehran, Iran
نشانی اینترنتی https://abjs.mums.ac.ir/article_16542.html
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده RESEARCH PAPER
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات