این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۸، شماره ۱، صفحات ۱۴-۲۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force
چکیده انگلیسی مقاله Flowforming is a plastic deformation process that is used to produce precise thin-walled tubes. Manufacturing of an internal gear through flowforming process is a new method by which the gear can be manufactured in just one pass. In the present study, the flowforming of internal gear is studied both experimentally and numerically. A simple set up was designed and built to manufacture the internal gear. The plastic behavior of the material was determined through tensile testing, and the friction condition was determined using a friction test. Parameters including profile and teeth height were measured and compared with simulated values. It is shown that there is a good agreement between the results of the simulation and those of the experiment. When the simulation is verified, the design of the experiment method is employed to investigate the influences of roller diameter, feed rate, thickness reduction percentage and attack angle on the process force. According to DOE results, all parameters and interactions are significant and affect the process force except D×T. The process force increases by increasing the roller diameter, thickness reduction percentage and feed rate, but decreases by increasing the attack angle.
کلیدواژه‌های انگلیسی مقاله Flowforming, Internal gear, Finite Element Analysis, Design of experiments, Optimization
نویسندگان مقاله Majid Khodadadi |
Department of Mechanical Engineering, University of Birjand, Birjand, Iran

Khalil Khalili |
Department of Mechanical Engineering, University of Birjand, Birjand, Iran

Amir Ashrafi |
Department of Mechanical Engineering, University of Birjand, Birjand, Iran

نشانی اینترنتی https://ijmf.shirazu.ac.ir/article_5993_a889d30694331aac3e7cab51ce5d896e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات