این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۸، شماره ۱، صفحات ۳۹-۴۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy
چکیده انگلیسی مقاله In this research, the equal channel angular pressing (ECAP) process of AM60 magnesium alloy was investigated by the finite element simulation as well as experimental test. The effect of process parameters on required force and strain distribution was also assessed. The simulation results were verified by the experimental tests. Using the full factorial design of experiments, effects of friction and process temperature were explored. The results indicated that an increase in the friction coefficient will significantly enhance the amount of pressing force (4-fold). Also, the effect of friction on process force was higher at lower temperatures and decreased with the rise of temperature. An increment in the friction coefficient from 0.02 to 0.08 raised the maximum strain by 9%. Furthermore, the maximum strain showed enhancement with temperature elevation.
کلیدواژه‌های انگلیسی مقاله ECAP process, Strain distribution, friction, AM60 alloy
نویسندگان مقاله Bahman Nikzad |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

Vali Alimirzaloo |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

Ali Doniavi |
Department of Industrial Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

Siroos Ahmadi |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

نشانی اینترنتی https://ijmf.shirazu.ac.ir/article_5995_a08d8853fd5e3f0ba03d8aafc314b491.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات