این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
چهارشنبه 19 آذر 1404
Iranian Journal of Materials Science and Engineering
، جلد ۱۹، شماره ۱، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Effect of Solution Treatment on the Rollability of a Cu-Ni-Mn-Sn Alloy
چکیده انگلیسی مقاله
In this research, the effect of initial microstructure and solution treatment on rollability and crystallographic texture of a Cu-Mn-Ni-Sn alloy has been investigated. The initial tests indicated that the rolling of the alloy at different temperature conditions is not possible due to formation of second phases. Herein to eliminate the segregated phases, according to DTA analysis, proper temperature for solution treatment was selected as 750°C applied at different periods of time. The obtained results showed that after 15-hour solution treatment, the complete elimination of Sn, Mn, Ni, and Fe-rich phases can be achieved. Also, the peaks of XRD shifted to the higher angles indicating that the alloying elements are dissolved. Meanwhile, the intensity of the texture reduced and the dominant texture changed from Goss and Brass-texture to Copper-texture. Accordingly, the amount of maximum total reduction at the rolling process increased from 16.37 to 109.46 after solution treatment.
کلیدواژههای انگلیسی مقاله
Microstructure,Texture,X-ray diffraction (XRD),rollability,Solution treatment
نویسندگان مقاله
| Morteza Hadi
Materials Engineering Group, Golpayegan College of Engineering, Isfahan University of Technology, 87717-67498, Golpayegan, Iran
| Omid Bayat
Department of Metallurgy and Materials Engineering, Hamedan University of Technology, Hamedan,Iran
| Hadi Karimi
Department of Materials Engineering, Malek-Ashtar University of Technology, 16788-15611, Iran
| Mohsen Sadeghi
Department of Materials Engineering, Malek-Ashtar University of Technology, 16788-15611, Iran
| Taghi Isfahani
Materials Engineering Group, Golpayegan College of Engineering, Isfahan University of Technology, 87717-67498, Golpayegan, Iran
نشانی اینترنتی
http://ijmse.iust.ac.ir/browse.php?a_code=A-10-2562-1&slc_lang=en&sid=1
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
Ceramics
نوع مقاله منتشر شده
Research Paper
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات