این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Science and Engineering، جلد ۱۹، شماره ۱، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Computational analysis on Elastic-Plastic fracture of Al/B4C and Al2SiO5 hybrid metal matrix composites
چکیده انگلیسی مقاله Hybrid composite finds wide application in various fields. In this present study, the hybrid composites are developed using stir casting technique as per Taguchi's L9 orthogonal array. Hybrid composites were fabricated using Aluminium Al6082 as the base material and reinforced with the combinations of reinforcements Al2SiO5 and B4C at three levels (4%, 8% and 12%).The developed composites were analyzed for micro structural  investigations and mechanical tests were done as per ASTM standards. The micro structural analysis was done using optical Microscope and Scanning electron microscope while composition studies were done using X-ray diffraction and EDAX. Mechanical test like tensile, impact and flexural were conducted and their damage assessment was done using Scanning electron microscope. The fatigue characteristics like high cycle fatigue and fatigue crack propagation was studied both experimentally and numerically. The experimental data and numerical modeling analysis data obtained for the hybrid composite system, agree with each other.           
کلیدواژه‌های انگلیسی مقاله Boron Carbide (B4C),Aluminium Silicate (Al2SiO5),X-ray diffraction,Scanning electron microscope (SEM).
نویسندگان مقاله | N. Puneeth
Research Scholar, Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, India


| G J Naveen
Research Scholar, Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, India


| V. Koti
Department of Mechanical Engineering, Ramaiah Institute of Technology, Bengaluru,Karnataka, India


| N.D. Prasanna
Department of Mechanical Engineering, Ramaiah Institute of Technology, Bengaluru,Karnataka, India


| Litton Bhandari
Department of Materials Science and Engineering Engineering, Indian Institute of Technology Gandhinagar, India


| J. Satheesh
Department of Mechanical Engineering, S J B Institute of Technology, Bengaluru, Karnataka, India


| P. Sampathkumara
Department of Mechanical Engineering, Sambhram Institute of Technology, Bengaluru, Karnataka, India
نشانی اینترنتی http://ijmse.iust.ac.ir/browse.php?a_code=A-10-4165-1&slc_lang=en&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده Ceramics
نوع مقاله منتشر شده Research Paper
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات