این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
چهارشنبه 19 آذر 1404
Iranian Journal of Materials Science and Engineering
، جلد ۱۷، شماره ۴، صفحات ۱-۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Plasma Nitriding Behavior of DIN 1.2344 Hot Work Tool Steel
چکیده انگلیسی مقاله
In the present investigation effects of time and temperature on plasma nitriding behavior of DIN 1.2344 (AISI H13) steel are studied. Pulsed plasma nitriding process with a gas mixture of N2 = 25% + H2 = 75% and duty cycle of 70% is applied to cylindrical samples of DIN 1.2344 hot work tool steel. X-ray diffraction, surface roughness, microhardness and ball on disc wear test are performed and behavior of plasma nitrided samples are compared. Scanning electron microscopy and optical microscopy are used in order to observe the microstructure of samples after nitriding. XRD results showed that the compound layer is dual phase. Hardness near the surface dropped by rising the process temperature and it rose in longer process durations. The comparison of µ results showed frictional properties in longer durations with lower temperatures is approximately the same in higher temperatures with shorter durations.
کلیدواژههای انگلیسی مقاله
Plasma nitriding,Friction coefficient,Effects of parameters,DIN 1.2344 tool steel.
نویسندگان مقاله
| S. karimzadeh
Department of Materials Engineering, Faculty of Mechanical Engineering, University of Tabriz,51666- 14766, Tabriz, Iran
| F. Mahboubi
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, P.O Box 15875-4413, Tehran, Iran
| G. Daviran
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, P.O Box 15875-4413, Tehran, Iran
نشانی اینترنتی
http://ijmse.iust.ac.ir/browse.php?a_code=A-10-2448-1&slc_lang=en&sid=1
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
گروه سطح پوشش و خوردگی
نوع مقاله منتشر شده
Research Paper
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات