این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۲، شماره ۴، صفحات ۹۵۳-۹۶۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Substantiating Parameters of Reinforced Rock Supports
چکیده انگلیسی مقاله In this work, we focus on the technology of stabilizing roof rocks by constructing separate rock supports reinforced with metal grids. Their parameters are specified using the results of physical structural modeling. The reinforced and non-reinforced rock supports with different fractional compositions are arranged and tested. Their initial shapes are similar to rectangular parallelepipeds with the base width-to-length ratios of 1:1, 1:1.5, and 1:2. Their shrinkage is determined by loading the supports regarding the rock particle size and the reinforcement density. Increasing the reinforcement density leads to reducing the linear dimensions without losing load-bearing capacity. It is proved that using the grids conduces the self-wedging of the rock particles. They are most effective at the initial stage of the formation of the load-bearing core. The exponential power dependence of the relative support shrinkage on the grid partitions number is obtained. The bearing core sizes in different supports are determined. For the non-reinforced supports, the core width is about 60% of the initial support width, and for the reinforced ones, it is about 90%. The exponential dependence of the core width-to-height ratio on the number of grid partitions is established. The expression for determining the reinforced support width is obtained. The support stability depends on the smallest initial base size. The size of the rock material has a little effect on the shrinkage. Reinforcement by three metal grids leads to reducing the pliability by 21% and 24% for the supports with the side ratios of 1:1 and 2:1, respectively.
کلیدواژه‌های انگلیسی مقاله roadway protection, artificial construction, rock support, reinforcement, structural modeling
نویسندگان مقاله S. Hryhorovych Nehrii |
Department of Mining of Mineral Deposits, State Higher Education Establishment Donetsk National Technical University, Pokrovsk, Ukraine

T. Oleksandrivna Nehrii |
Department of Mining of Mineral Deposits, State Higher Education Establishment Donetsk National Technical University, Pokrovsk, Ukraine

H. Viktorivna Piskurska |
Language Training Department, State Higher Education Establishment Donetsk National Technical University, Pokrovsk, Ukraine

E. Viktorovych Fesenko |
Department of Organization and Production Automation, Technical University Metinvest Polytechnic, Mariupol, Ukraine

Y. Yevhenovych Pavlov |
Department of Organization and Production Automation, Technical University Metinvest Polytechnic, Mariupol, Ukraine

A. Mykolaiovych Surzhenko |
Department of Applied Mechanic, State Higher Education Establishment Donetsk National Technical University, Pokrovsk, Ukraine

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_2267_3aeae42cbd9bf2673b33550721b6a78e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات