این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۲، شماره ۳، صفحات ۷۶۹-۷۸۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Compressive Failure Analyses of Rock-Like Materials by Experimental and Numerical Methods
چکیده انگلیسی مقاله Investigating the crack propagation mechanism is of paramount importance in analyzing the failure process of most materials. This process may be exposed during each kind of loading on the materials. In this work, the cracking mechanism in rock-like materials is studied using the numerical methods and compared with the experimental test results. However, the mechanism of crack growth in brittle materials such as rocks is influenced by different parameters. This research work focuses on the effect of the initial crack angles on the crack growth paths of these materials. Some cubic samples containing pre-existing cracks are tested in compression by considering different flaw orientations. The specimens are made of cement, water, and sand. Moreover, the mentioned process is numerically simulated using three different methods: the finite difference method for discontinuous bodies or discrete element method, the displacement discontinuity method, and the versatile finite element method. The micro-parameters for simulation are gained by the trial-and-error procedure for the discrete element method. Eventually, the crack growth paths observed in the experiments are compared with the numerically simulated models. The results obtained show that these central cracks propagate in two ways, which are dependent on their initial angle. By increasing the initial crack angle to greater than 30° (α > 30°), the wing crack path moves further away from the initial crack, and by decreasing α to smaller than 30° (α < 30°), only the shear cracks are initiated. Therefore, the validity and accuracy of the results are manifested by comparing all the corresponding results obtained by different methods. Based on these results, it can generally be concluded that the strength of the cubic (rock material) specimens increases with increase in the crack angles with respect to the applied loading direction.
کلیدواژه‌های انگلیسی مقاله Crack Propagation, Fracture Mechanics, Physical Modeling, Finite Element Method, Discrete Element Method
نویسندگان مقاله M. Davood Yavari |
Department of Mining Engineering, Bafgh Branch, Islamic Azad University, Bafgh, Iran

H. Haeri |
State Key Laboratory for Deep GeoMechanics and Underground Engineering, Beijing, China

V. Sarfarazi |
Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran

M. Fatehi Marji |
Mine Exploitation Engineering Department, Faculty of Mining and Metallurgy, University of Yazd, Yazd, Iran

H. A. Lazemi |
Department of Mining Engineering, Bafgh Branch, Islamic Azad University, Bafgh, Iran

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_2089_38e980e77c1b8e06f9a06a3db6b3e1f5.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات