این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 6 دی 1404
Polyolefins Journal
، جلد ۸، شماره ۱، صفحات ۲۱-۳۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
LDPE and poly(1-butene) blends: Morphology, crystallinity and rheological properties
چکیده انگلیسی مقاله
In this work, the compatibility and crystallinity of low density polyethylene (LDPE) and polybutene-1 (PB-1) blends were studied. Various blends of LDPE/PB-1 containing 5, 10 and 20 wt.% PB-1 were prepared in a corotating twin-screw extruder and characterized by scanning electron microscopy (SEM), shear oscillation rheology and wide-angle X-ray diffractometry (WAXD). A matrix-droplet morphology was observed in SEM images, indicating incompatibility of the two polymers in the solid state. Compared to neat LDPE, the relaxation spectra of the blends were broadened, and a slight increase in their relaxation times was observed. The relaxation time of the blends was enhanced by increasing PB-1 content, which was further proved by fitting rheological data in the Carreau-Yasuda model. Deviation of Cole-Cole diagrams from circular shape means that the blend samples were not miscible and the positive-deviation behavior of the complex viscosity and storage modulus from the mixing rule revealed the formation of strong interfacial interactions. The crystallinity of both LLDPE and PB-1 was decreased as a result of blending. The peaks attributed to the form II of PB-1 crystals were eliminated and the peaks related to LDPE were obviously weakened, suggesting to prevent crystallinity of polymers which is associated with a reduction in the total crystallinity percentage for the blend. The reduction of crystallinity was more pronounced in PB-1 phase.
کلیدواژههای انگلیسی مقاله
blending, morphology, LDPE, Crystallinity, PB-1
نویسندگان مقاله
Reza Poorghasemi |
Department of polymer processing, Iran Polymer & Petrochemical Institute, Tehran, 14977-13115, Iran
Yousef Jahani |
Department of polymer processing, Iran Polymer & Petrochemical Institute, Tehran, 14977-13115, Iran
نشانی اینترنتی
http://poj.ippi.ac.ir/article_1754_ae92d97bbeed05ad718c818c08b7b727.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات