این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Progress in Color, Colorants and Coatings، جلد ۱۵، شماره ۲، صفحات ۱۱۱-۱۲۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental and Theoretical Investigation on the Corrosion Inhibitor Potential of N-MEH for Mild Steel in HCl
چکیده انگلیسی مقاله There are significant losses at high costs for long periods due to the corrosion and damage it causes in most industrial processes, especially the oil and gas industries. The corrosion inhibition ability of N-methyl-2-(1-(5-methyl thiophene-2-yl) ethylidene) hydrazine carbothioamide (N-MEH) was examined. It was tested on mild steel in a 1 M hydrochloric acid solution. Gravimetric measurements and scanning electron microscopy (SEM) were used to confirm the effort compound as a corrosion inhibitor. The experimental results showed that the maximum inhibition efficacy of 95.3 % was performed at an optimal inhibitory concentration of 0.005 M and 303 K using weight loss techniques. SEM indicates that N-MEH molecules are absorbed onto the surface of mild steel. As a complementary technique, density functional theory (DFT) was used to look at the interactions between N-MEH molecules and mild steel surfaces. N-MEH molecules' adsorption on the surface of mild steel follows the processes of chemical and physical absorptions and obeys the Langmuir isothermal adsorption model.
کلیدواژه‌های انگلیسی مقاله Weight loss, Corrosion inhibitor, Langmuir, physisorption, SEM
نویسندگان مقاله A. K. Khudhair |
Ministry of Higher Education and Scientific Research, University of Technology, P.O. Box: 10001, Baghdad, Iraq

A. M. Mustafa |
Production Engineering and Metallurgy, University of Technology, P.O. Box: 10001, Baghdad, Iraq

M. M. Hanoon |
Production Engineering and Metallurgy, University of Technology, P.O. Box: 10001, Baghdad, Iraq

A. Al-Amiery |
Production Engineering and Metallurgy, University of Technology, P.O. Box: 10001, Baghdad, Iraq

L. M. Shaker |
Department of Chemical and Process Engineering, Faculty of Engineering & Built Environment, University Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia

T. Gazz |
Technical College Al-Musaib, Al-Furat Al-Awsat Technical University, P.O. Box: 51006, Babil, Iraq

A. B. Mohamad |
Department of Chemical and Process Engineering, Faculty of Engineering & Built Environment, University Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia

A. H. Kadhum |
College of Dentistry, Al-Ameed University, P.O. Box: 1238, Karbalaa, Iraq

M. S. Takriff |
Department of Chemical and Process Engineering, Faculty of Engineering & Built Environment, University Kebangsaan Malaysia, Bangi, Selangor 43600, Malaysia

نشانی اینترنتی http://pccc.icrc.ac.ir/article_81763_cf5e3fce22ef4134f1f3b75b5d65a7fe.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات