این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۳، شماره ۱، صفحات ۲۱۷-۲۳۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Determination of Caving Hydraulic Radius of Rock Mass in Block Caving Method using Numerical Modeling and Multivariate Regression
چکیده انگلیسی مقاله Determining the hydraulic radius of the undercut in the block caving method is one of the key issues in this method. The hydraulic radius is directly related to the minimum caving span. In this research work, the rock mass cavability is investigated using the UDEC and 3DEC software. Since the factors affecting the cavability are very diverse and numerous, firstly, by 2D modeling in the UDEC software and examining the trend of changes in the minimum caving span, the most important factors including the depth, dip of the joint, number of joints, angle of friction of the joint surface, and joints spacing are selected for the final study. The variation trend of each variable is investigated by keeping the other variables constant (single-factor study) among various factors. In the second step, the minimum caving span for the five main factors and values is ​​determined in the single-factor study using the SPSS software and the multivariate regression method. Then the power function of the minimum caving span is chosen based on the selected variables with a coefficient of determination of 0.76. In continuation, a simple 3D model is built from the undercut. A linear equation is achieved between the results of the 3D and 2D modeling results in similar conditions. In a model with certain conditions, using the equation obtained from the numerical method, the calculated hydraulic radius of caving is 22.5 m, which is close to the result obtained from the Laubscher's empirical method with the same condition (24 m).
کلیدواژه‌های انگلیسی مقاله Cavability, minimum caving span, Numerical method, Multivariate Regression
نویسندگان مقاله B. Alipenhani |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

A. Majdi |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

H. Bakhshandeh Amnieh |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_2341_ac1742c85ead5bcde5b821d1d3428952.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات