این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۳، شماره ۱، صفحات ۲۶۹-۲۸۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods
چکیده انگلیسی مقاله A common instability in the rock slopes is a toppling failure. If this type of slope failure occurs due to another kind of failure, it is considered as the secondary toppling failure. A type of secondary toppling failure is the slide-head-toppling failure. In this instability, the upper portion of the slope is toppled, and the pressure caused by the overturning of rock blocks leads to a semi-circular sliding in the soil mass at the slope toe. This instability is examined through the theoretical analysis and physical modelling. Firstly, the failure mechanism mentioned above is described. Next, the slide-head-toppling failure is studied through seven numerical simulations. The Phase2 and UDEC softwares, as the finite element and distinct element methods, respectively, are used in this work. Different kinds of slide-head-toppling failure are modelled such as the blocky, block-flexural, and flexural toppling failures. The numerical modelling results are compared with the existing physical tests and theoretical approaches. This comparison illustrates that the safety factor is underestimated due to the plane strain supposition in numerical modelling. However, the side-friction in the physical models has violated this assumption. The results obtained demonstrate that the distinct element method has an acceptable accuracy compared to the finite element method. Thus this numerical code can be used in order to examine the mentioned failure.
کلیدواژه‌های انگلیسی مقاله Rock Slopes, Slide-Head-Toppling, Numerical Simulation, DEM and FEM Methods
نویسندگان مقاله H. Sarfaraz |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

A.R. Bahrami |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

R. Samani |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_2380_d2e74f43a2b7185219992d96c7744a03.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات