این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 6 دی 1404
حفاظت زیست بوم گیاهان
، جلد ۸، شماره ۱۷، صفحات ۱۵۷-۱۷۴
عنوان فارسی
بررسی مدل های آلومتریک در برآورد ارتفاع گونه صنوبر (Populusdeltoides)
چکیده فارسی مقاله
یکی از مهمترین موضوعات در زمینه بیومتری جنگل، استفاده از توابع آلومتریک برای برآورد ارتفاع درخت با استفاده از مدلهای قطر برابر سینه- ارتفاع است. معمولاً اندازهگیری ارتفاع کل درختان نسبت به قطر برابر سینه، فرآیندی پیچیده و زمانبر است. در روابط آلومتریک قطر برابر سینه بهطور مستقیم از تنه درخت اندازهگیری میشود اما ارتفاع درخت برآوردی از مدل آلومتریک است که درصورت صحت مدلهایایجادشده، کاربرد آنها نیز با دقت بیشتری همراه خواهد بود. بههمین دلیل امروزه مدلهای قطر - ارتفاع بهعنوان عنصری مهم در مدیریت و پایش جنگل موردتوجه قرارگرفته است. ازاینرو در مطالعه حاضر، ارزیابی کارایی مدلهای آلومتریک در برآورد ارتفاع گونه صنوبر (Populusdeltoides) موردمطالعه قرار گرفت. به این منظور از 32 مدل آلومتریک استفاده شد و بهمنظور برآورد صحت هر یک از مدلها از معیارهای ضریب تبیین، خطای استاندارد، معیار آکائیک، ریشه میانگین مربع خطا، درصد ریشه میانگین مربع خطا، اریبی و درصد اریبی استفاده شد. نتایج نشان داد که پنج مدل لوچ، راتکووسکی، هایپربولیک 2، هایپربولیک 3 و هندسی تعدیلشده توانستند ارتفاع درختان صنوبر (متغیر وابسته) را برحسب قطر برابر سینه (متغیر مستقل) با بیشترین مقدار ضریب تبیین (830/0-829/0)، کمترین خطای استاندارد (758/1-756/1) و کمترین RMSE (747/0- 682/0 متر)، درصد RMSE (511/3-177/3 درصد)، Bias (331/0- تا 076/0-) و درصد Bias (558/1 – 352/0 درصد) برآورد کنند. همچنین نتایج آزمون آماریt نشان داد که بین مقادیر پیشبینیشده ارتفاع برحسب این مدلها و مقادیر اندازهگیریشده واقعی تفاوت معنیداری وجود نداشت و این مدلها توانستند ارتفاع درختان صنوبر را بدون اختلاف معنیداری با ارتفاع واقعی برآورد کنند.
کلیدواژههای فارسی مقاله
درختکاری، صنوبر، مدل قطر – ارتفاع، مدلسازی
عنوان انگلیسی
Investigation of the Allometric Models in Estimation of Poplar (Populus deltoides) Height
چکیده انگلیسی مقاله
One of the most important issues in forest biometrics is the use of allometric functions to estimate tree height by using diameter-height models. Measuring the total height of trees is usually a complex and time-consuming process. In allometric functions, the diameter is measured directly but the height of the tree is an estimate of an allometric model, which will be more accurate if the created models were correctly designed. For this reason, diameter-height models have been considered as an important element in forest management and monitoring nowadays. Therefore, we evaluated the performance of allometric models in estimating the height of this species in the present study. For this purpose, 32 allometric models were used and the coefficient of determination, standard error, Akaike coefficient, Root Mean Square Error, percentage of Root Mean Square Error, Bias, and percent of Bias criteria were used for estimating the accuracy of each model. The results showed that five models consisting of Loetsch, Ratkowsky, Hyperbolic 2, Hyperbolic 3, and Modified Geometry were able to measure the height of poplar trees (as the dependent variable) in terms of diameter of breast height (as the independent variable) with the highest amount of coefficient of determination (0.829-0.830), The lowest amounts of standard error (1.756-1.758), RMSE (0.682- 0.747 m), the RMSE% (3.177-3.511), Bias (-0.076 to -0.331), and Bias% (0.352 -1.558). In addition, the results of the t-test showed that there was no significant difference between the predicted values of height and the actual measured values of height. Consequently, these models were able to estimate the height of poplar trees without significant difference.
کلیدواژههای انگلیسی مقاله
Afforestation, Poplar (Populus deltoides), Diameter-height model, Modelling
نویسندگان مقاله
طوبی عابدی | Tooba Abedi
جهاد دانشگاهی
رؤیا عابدی | Roya Abedi
University of Tabriz
دانشگاه تبریز
نشانی اینترنتی
http://pec.gonbad.ac.ir/browse.php?a_code=A-10-474-3&slc_lang=fa&sid=1
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
تخصصی
نوع مقاله منتشر شده
پژوهشی
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات