این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
سه شنبه 25 آذر 1404
مهندسی عمران مدرس
، جلد ۲۱، شماره ۵، صفحات ۱۴۷-۱۵۹
عنوان فارسی
بررسی عددی تأثیر تنش های حرارتی بر رفتار اتصالات تیر عریض-ستون بتن مسلح
چکیده فارسی مقاله
آتش سوزی یکی از مخاطراتی است که مطالعه پیرامون اثرات آن بر سازه های مختلف ضروری می باشد. آتش سوزی می تواند باعث وارد آمدن خسارات اجتماعی و اقتصادی وسیع گردد. بعلاوه اطلاع از میزان خرابی بتن در معرض حرارت نیز می تواند در مباحث مقاوم سازی سازه ها به طراحان کمک کند. اتصالات یکی از نواحی بسیار حساس در کلیه قابهای سازهای اعم از فولادی و بتنی میباشند که عملکرد آنها اثر بسیار مهمی بر روی پاسخ سازه دارد. بدین منظور مطالعه پیرامون رفتار انواع اتصالات تیر- ستون در شرایط محیطی متفاوت قابل اهمیت می باشد. شایان ذکر است، داده های آزمایشگاهی و عددی پیرامون رفتار اتصالات تیر- ستون بتن مسلح در حرارتهای بالا موجود نمی باشد. بعلاوه بدلیل ویژگی خاص اتصالات تیر عریض- ستون یعنی عبور بخشی از آرماتورهای طولی تیر عریض از خارج چشمه اتصال، در این پژوهش رفتار اتصالات تیر عریض- ستون بتن مسلح تحت تأثیر تنشهای حرارتی مورد بررسی قرار گرفته است. در این مقاله 9 مدل عددی اتصال تیر عریض- ستون تحت آتش سوزی مورد بررسی قرار گرفت. پس از اعتبارسنجی نمونه های مدلسازی شده، مطالعه پارامتریک بر روی آنها انجام شد. پارامترهایی از قبیل ارتفاع تیر عریض، مساحت میلگرد های تیر، مقاومت بتن و درصد میلگرد های عبوری از چشمه اتصال مورد بررسی قرار گرفته است. نتایج نشان دادند که با افزایش ارتفاع تیر، مقاومت سازه در برابر حریق بیشتر می گردد. همچنین با افزایش مساحت میلگرد و مقاومت بتن، مقاومت سازه در برابر آتش بیشتر می شود. بعلاوه با کاهش میلگرد عبوری از چشمه اتصال، مقاومت سازه در آتش سوزی کاهش می یابد. در تمامی این موضوعات یک ویژگی مشترک وجود دارد؛ تمامی اتصالات در دمای حدود 450 درجه سانتی گراد شروع به تشکیل مفصل پلاستیک کرده و این دما در اتصالات، در زمانی حدود 200 دقیقه پس از شروع آتش سوزی شکل می گیرد.
کلیدواژههای فارسی مقاله
اتصال تیر عریض-ستون،اتصال بتن مسلح،تنشهای حرارتی،آتش سوزی،مدلسازی عددی
عنوان انگلیسی
Numerical investigation of the effect of thermal stresses on the behavior of reinforced concrete wide beam-column connections
چکیده انگلیسی مقاله
Fire is one of the risks that the study of its effects on different structures is essential. Fire can lead to extensive social and economic damage. Furthermore, knowing the extent of damage to concrete under heat can also help designers in the strengthening of structures. Connections are one of the most sensitive areas in all structural frames, steel and concrete, affected by large forces during earthquakes and their performance has a very important effect on the structurechr('39')s response. For this purpose, it is important to study the behavior of different types of beam-column joints in different environmental conditions. However, experimental and numerical data on the behavior of RC beam-column joints under high temperature are not available. In addition, due to the special feature of beam-column joints, ie passing part of the longitudinal reinforcements of the beam outside the connection spring, in this study, the behavior of beam-column reinforced concrete joints under the influence of thermal stresses has been investigated. In this research, 9 numerical models of wide beam-column joints under post-earthquake fire were investigated. After validation of modeled specimens, parametric study was conducted. Parameters such as wide beam height, beam reinforcement area, concrete grade and percentage of passing bars through the column core were studied. Results showed that with increasing the height of the beam, the fire resistance of the structure increases. Also, with increasing rebar area and concrete strength, the structurechr('39')s fire resistance increases. In addition, by reducing the rebar passing through the column core, the fire resistance of the structure is reduced. There is one thing in common in all these matters; all joints begin to form plastic joints at a temperature of about 450°C, and this temperature in the joints is formed about 200 minutes after the start of the fire.
کلیدواژههای انگلیسی مقاله
Wide beam-column joint,Reinforced concrete joint,Thermal stresses,Fire,Numerical simulation
نویسندگان مقاله
امیرحسین باباشاه | Amir Hosein Babashah
Islamic Azad University, Science and Research Branch
دانش آموخته دانشگاه آزاد اسلامی واحد علوم و تحقیقات
سارا میرزاباقری | Sara Mirzabagheri
Assistant Professor, Islamic Azad University, Parand Branch
دانشگاه آزاد اسلامی واحد پرنددانش آموخته دکتری دانشگاه تربیت مدرس
نشانی اینترنتی
http://mcej.modares.ac.ir/browse.php?a_code=A-10-45492-1&slc_lang=fa&sid=16
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
پژوهشی اصیل (کامل)
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات