این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
مهندسی عمران مدرس
، جلد ۲۰، شماره ۲، صفحات ۱۲۳-۱۳۳
عنوان فارسی
ارزیابی تأثیر سیمان پرتلند آهکی بر ویژگیهای مکانیکی و عملکردی بستر رسی تثبیت شده
چکیده فارسی مقاله
آسیبهای ناشی از چرخههای یخبندان و ذوب یکی از مهمترین مشکلاتی است که در پروژههای راهسازی نواحی سردسیر انجام میشود و درنتجه مقاومت و دوام آنها به علت این سیکلها کاهش مییابد. لذا هدف از این پژوهش ارزیابی فنی تأثیر سیکلهای یخزدگی و ذوب شدن بر روی پارامترهای دوام بستر رسی تثبیتشده با سیمان آهکی با تکیه بر نتایج آزمایش مقاومت فشاری است. 400 کیلوگرم نمونه خاک از بستر راه روستایی راز به پسین دره تهیه شد. در مرحله اول آزمایشهای دانهبندی، حدود اتربرگ و... روی 20 نمونه از خاک انجام شد. مرحله دوم وزن مخصوص خشک حداکثر و میزان رطوبت بهینه مخلوط خاک-سیمان تعیین شد. مرحله سوم برای تعیین درصد سیمان آهکی مناسب جهت اختلاط، آزمایش تراکم مخلوط خاک-سیمان با درصدهای مختلف (6% ، 8% ، 10% ، 12% و 14%) با سیمان آهکی نوع 1 و نوع 2 انجام شد. در مرحله چهارم 24 نمونه استوانهای با افزودن (8% ،10% ، 12%) سیمان آهکی نوع 1 و نوع 2 به نمونه خاک ساخته شده و تحت آزمایش مقاومت فشاری قرار گرفتند. در مرحله پنجم مقاومت کششی غیرمستقیم و آزمایش مدول تنش-کرنش مخلوط خاک-سیمان تعیین شد. نتایج نشان داد دانسیته خشک حداکثر مخلوط خاک-سیمان با افزودن 10 درصد سیمان آهکی نوع 1 و نوع 2 به دست میآید. همچنین نتایج حاکی از افزایش مقاومت فشاری مخلوط ساخته شده با سیمان پرتلند آهکی نوع 1 نسبت به سیمان پرتلند آهکی نوع 2 داشته و کلیه نمونههای دارای 8 درصد افزودنی سیمان آهکی، پس از 7 روز عملآوری مقاومتی بیش از 35 کیلوگرم بر سانتیمترمربع را نشان میدهد و این بدان معنی است که نمونههای ساخته شده با سیمان پرتلند آهکی از دوام کافی در برابر عوامل جوی برخوردار میباشند.
کلیدواژههای فارسی مقاله
،یخ زدگی،ذوب،دوام،تثبیت،سیمان آهکی
عنوان انگلیسی
The Effect of freezing and Thawing cycles on the Durability Parameters of Lime- Cement Stabilized Clay Subgrade based on compressive strength results
چکیده انگلیسی مقاله
Clay soils often cause problems in construction projects. In cold regions, freezing and thawing of clay soils can cause significant changes in the geotechnical characteristics of the soil. Frozen and thawed soils have shown changes in volume, strength, compressibility, frozen moisture content, bearing capacity and microstructural changes. In road construction projects in cold regions, freezing and melting is one of the factors affecting the unstability of soil engineering behavior, including the durability and performance of pavement and pavement layers. Therefore, the purpose of this research is to evaluate the effect of freezing and melting cycles on the parameters of the durability of calcareous stabilized clay bed based on compressive strength test results. 400 kg of soil samples were collected from the subgrade of the RAZ-PASIN rural road. In the first stage, granulation experiments, Atterberg and ... on 20 soil samples were performed. The second stage was the dry maximum dry matter and optimum moisture content of the soil-cement mixture. The third step was to determine the percentage of suitable cement for mixing, soil-cement mixed density with different percentages (6%, 8%, 10%, 12% and 14%) with limestone cement type 1 and type 2. In the fourth stage, 24 cylindrical specimens were added to the soil sample by adding (8%, 10%, 12%) of type 1 and type 2 calcareous cement and tested for compressive strength. In the fifth step, the indirect tensile strength and the stress-strain modulus of the mixed soil-cement were determined. The results indicated that the maximum dry matter density of the soil-cement mixture was obtained by adding 10% of type 1 and type 2 calcareous cement. The results also showed an increase in the compressive strength of the composite made with type 1 lime Portland cement compared to Type 2 lime Portland cement, and all specimens containing 8% calcareous cement additive exhibit more than 35 kg / cm2 after 7 days of resistance treatment. This means that samples made with Portland cement have a sufficient durability against atmospheric agents. If the use of calcareous Portland cement is used only for bed consolidation as a layer of pavement layers and the appropriate weight percentage of Portland Type II cement is selected to be 8% for the consolidation of the studied soil, the cost of the Rural Road Project will be compared. The Late Valley showed a 13% reduction in the cost of supplying calcareous Portland cement compared to Type II Portland cement (Table 10). This is due to a 15% reduction in energy costs (gas and electricity consumed) in the manufacture of calcareous Portland cement compared to Type II Portland cement. By comparing the results of compressive strength of soil-mixture of type 1 calcareous Portland cement and type 2 cement, it can be concluded that the effect of type 1 calcareous Portland cement in obtaining compressive strength is better than type 2 calcareous Portland cement due to increasing Lime is made of cement composition. This increased resistance is due to the ion exchange reaction and the agglomeration-compaction reaction between lime and soil and is achieved by lime contact with most fine-grained soils. Thus, the calcium ions in the lime are replaced by the lower-capacity positive ions in the soil. This results in the accumulation of calcium ions around the clay particles.
کلیدواژههای انگلیسی مقاله
FREEZING,THAWING,DURABILITY,STABILIZATION,LIME CEMENT
نویسندگان مقاله
سید فرزین فائزی | seyed farzin faezi
civil engineering, payame noor university
گروه عمران، دانشگاه پیام نور تهران
سیدرضا شریفی | seyed reza sharifi
civil engineering, payame noor university
گروه عمران، دانشگاه پیام نور تهران
مهرداد میرشکاریان بابکی |
نشانی اینترنتی
http://mcej.modares.ac.ir/browse.php?a_code=A-10-41858-2&slc_lang=fa&sid=16
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
پژوهشی اصیل (کامل)
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات