این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 27 آذر 1404
مهندسی عمران مدرس
، جلد ۲۲، شماره ۳، صفحات ۰-۰
عنوان فارسی
مطالعه عددی و آزمایشگاهی اندرکنش موج با محیط متخلخل موجشکن سکویی چندلایه
چکیده فارسی مقاله
شناخت فیزیک و مکانیسم عملکرد موجشکنهای تودهسنگی تحت اثر برخورد امواج تابشی، به دلیل پیچیدگیهای فراوان اندرکنش موج و سازه متخلخل، نیازمند مطالعات پایه و اساسی است. بدین منظور در پژوهش حاضر، با انجام مدلسازی عددی و درنظر گرفتن مشاهدههای آزمایشگاهی، به مطالعه و فهم بهتر جریانهای ایجاد شده در بیرون و داخل سازه موجشکن سکویی چندلایه در اثر اندرکنش امواج با سازه متخلخل پرداخته میشود. برای انجام درستیآزمایی نتایج حاصل از مدلسازی عددی با نتایج مدل آزمایشگاهی سازه موجشکن سکویی چندلایه، جریان بیرون سازه و داخل محیط متخلخل بهترتیب توسط نوسانات سطح آب جلوی سازه و دامنه تغییرات فشار مقایسه میشوند. در این تحقیق با مطالعه تغییرات فشار داخل سازه در اثر پر و خالی شدن محیط متخلخل و همچنین بررسی الگوی جریان خروجی از داخل موجشکن تودهسنگی در زمان وقوع بیشینهی پایینروی موج مشخص گردید که نیروی ناشی از گرادیان فشار مثبت که به سمت خارج سازه جهتدهی شده و همچنین نیروی عمودی ناشی از جریان تراوشی ایجاد شده از داخل به خارج سازه در طول جریان پایینرونده موج بر روی شیب سازه، بهصورت همزمان اتفاق افتاده و بیشترین تأثیر را بر ناپایداری سازه دارد.
کلیدواژههای فارسی مقاله
موجشکن سکویی چندلایه،شبیهسازی عددی،مدلسازی آزمایشگاهی،پایینروی موج،محیط متخلخل.
عنوان انگلیسی
Numerical and experimental study on wave interaction with a porous media of multi-layer berm breakwater
چکیده انگلیسی مقاله
Porous breakwater structures are widely used as protection against waves for ports and harbors as well as for general coastal protection. Often the breakwater structure is designed as a porous structure that allows water to flow through the structure while the wave energy is removed. These structures prevent coastal erosion and ensure safe and functioning harbors. As such, it is of high importance that these structures remain stable under extreme wave action. On the other hand, regarding the high complexity of wave interaction with porous structures, it is required to provide a rich understanding and conduct fundamental studies on the mechanism of rubble mound breakwaters subjected to incident waves. The existing literature review on wave interaction with rubble mound breakwaters reveals two mechanisms inside the porous media of such structures and outside the structure on the armor layer. Both could make destructive forces affecting the structure's stability. In the present study, the stability of the multi-layer berm breakwater has been studied by considering the effect of run-up/run-down flow on the armor layer of a breakwater and, consequently, the flow inside the porous media as it gets filled and empty during wave run-up and run-down. Both numerical and experimental methods are used to investigate the flow inside and outside the multi-layer berm breakwater. Validation of numerical results is conducted through the use of experimental results, including the water level fluctuation outside the structure and also the water pressure variations inside the breakwater. The Flow-3D software has been used to simulate and solve the governing equations on the flow. FLOW-3D numerically integrates RANS (Reynolds Average Navier-Stokes) equations using the Volume of- Fluid (VOF) method to track the free surface. It has been thoroughly tested for coastal hydrodynamics problems. Various turbulence models are available, and the results presented here are based on the RNG turbulence model. The time series of pressure variation in the porous media indicates that as the flow infiltrates, the created pressure damping and also its variation at a constant elevation have been significantly decreased due to energy dissipation during the infiltration. Moreover, at the maximum run-down and exfiltration process, the created flow from inside to outside would be approximately perpendicular to the structure's slope at about the maximum run-down elevation. Results reveal that the pressure gradient due to changes in the flow field of porous media would lead to a pressure force toward the outside during the run-down and a pressure force toward the inside during the run-up. It has been found that the positive pressure gradient force toward outside during the run-down and also the perpendicular force of flow during the exfiltration occurred simultaneously and acted as an active force to destabilize the stones. More to the destabilizing mechanism of stones, the effect of flows occurred during the run-up, and run-down on the armor layer have been investigated using the recorded images during the experimental tests.
کلیدواژههای انگلیسی مقاله
Multi-layer berm breakwater,Numerical simulation,Experimental modeling,Run-down,Porous media.
نویسندگان مقاله
مجید احسانی | Majid Ehsani
Department of Civil Engineering, Isfahan University of Technology
دانشگاه صنعتی اصفهان- دانشکده مهندسی عمران
محمدنوید مقیم | Mohammad Navid Moghim
Associate Professor, Department of Civil Engineering, Isfahan University of Technology
دانشیار دانشکده مهندسی عمران، دانشگاه صنعتی اصفهان،
مهدی شفیعی فر | Mehdi Shafieefar
Department of Civil and Environmental Engineering, Tarbiat Modares University
دانشگاه تربیت مدرس- دانشکده مهندسی عمران و محیط زیست
نشانی اینترنتی
http://mcej.modares.ac.ir/browse.php?a_code=A-10-45903-1&slc_lang=fa&sid=16
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
پژوهشی اصیل (کامل)
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات