این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
چهارشنبه 26 آذر 1404
Journal of Petroleum Science and Technology
، جلد ۱۲، شماره ۲، صفحات ۴۲-۵۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Laboratory Study of the Application of a Novel Bio-Based Polymer to Synthesize Aphron Drilling Fluids
چکیده انگلیسی مقاله
Aphron fluids are a special type of foam in which the gas bubble (air or any other gas) is surrounded by a double-walled layer consisting of surfactant and polymer. Therefore, it is more stable at high temperature and pressure conditions due to being preserved by three layers. These fluids are widely used in industry. Today, the industry uses various polymers such as acrylamides, polyacrylamides, and hydrolyzed acrylamides that are harmful to the environment. In this study, the possibility of using natural and biodegradable polymers such as Astragalus Gum and starch is investigated. The results showed that the Aphron fluid made from Astragalus Gum (extracted from a dessert plant) had a higher volumetric yield than industrial polymers. Stability over time and rheological properties for Astragalus Gum are also acceptable. Also, it is found that increasing the polymer concentration increases the stability and rheological properties, but in contrast, the volumetric yield decreases. The effect of salt and surfactant concentrations is also evaluated in this research. The results show that increasing the surfactant concentration increases the volumetric yield of the fluid. Increasing the surfactant concentration from 1 wt% to 2 wt% increases the volumetric efficiency of Aphron fluids by 5%. In general, according to the results obtained in this research work, Astragalus Gum’s performance is better than synthetic polymers for making Aphron fluids.
کلیدواژههای انگلیسی مقاله
Biodegradable Polymer, Aphron Drilling Fluid, Rheological Properties
نویسندگان مقاله
Omid Sharifi |
Department of Petroleum Engineering, Islamic Azad University of Omidieh Branch, Omidieh, Iran
Saeed Parvizi |
Department of Petroleum and Natural Gas Engineering, Sahand University of Technology, Tabriz, Iran
Khalil Shahbazi |
Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran
Samaneh Ghorbanpour |
Department of Petroleum Engineering, Islamic Azad University of Mahshahr Branch, Mahshahr, Iran
نشانی اینترنتی
https://jpst.ripi.ir/article_1284_eb6dbe246bf9b32557540a2ac848d504.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات