این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
فیزیک زمین و فضا
، جلد ۴۸، شماره ۴، صفحات ۱۲۵-۱۳۵
عنوان فارسی
Calibration of IASPEI Standard Broad-band Magnitude mB for Iranian Plateau Earthquakes
چکیده فارسی مقاله
Located in Alp-Himalayan belt and an active tectonic plate, Iran is annually struck by major earthquakes. Since shallow earthquakes cause considerable loss of lives and property in this region, using any method to decrease the time of magnitude estimation of great earthquakes is very important for making a prompt decision about what to do. To achieve this aim, m
B
was computed as a rapid estimator for 38 earthquakes with magnitudes greater than 6 occurred in Iran and adjacent areas (24°-44°N, 42°-66°E) from 1990 to 2018. The magnitudes that estimated by using the calibration function by Saul & Bormann (2007) have a standard error of 0.49 from Mw (in this study). Therefore, m
B
’s calibration function was modified. As a result, the magnitudes obtained are approximately equal to those of reported Mw (a standard error of 0.18). The calibration function acquired in this study for Iran’s earthquakes is lower than the m
B
’s global calibration function obtained by Saul & Bormann (2007). Their difference is nearly one unit at short distances, which can be related to the earthquakes located in subduction zones and plates boundaries used by Saul & Bormann (2007) that systemically have lower stress drops than intraplate earthquakes considered here. Thus it is needed to develop improved region-specific calibration functions for m
B
. However, the difference became smaller at distances greater than 20°. Consequently, this method and new calibration function can be employed to estimate magnitudes as early as possible across Iran plateau.
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Calibration of IASPEI Standard Broad-band Magnitude mB for Iranian Plateau Earthquakes
چکیده انگلیسی مقاله
Located in Alp-Himalayan belt and an active tectonic plate, Iran is annually struck by major earthquakes. Since shallow earthquakes cause considerable loss of lives and property in this region, using any method to decrease the time of magnitude estimation of great earthquakes is very important for making a prompt decision about what to do. To achieve this aim, m
B
was computed as a rapid estimator for 38 earthquakes with magnitudes greater than 6 occurred in Iran and adjacent areas (24°-44°N, 42°-66°E) from 1990 to 2018. The magnitudes that estimated by using the calibration function by Saul & Bormann (2007) have a standard error of 0.49 from Mw (in this study). Therefore, m
B
’s calibration function was modified. As a result, the magnitudes obtained are approximately equal to those of reported Mw (a standard error of 0.18). The calibration function acquired in this study for Iran’s earthquakes is lower than the m
B
’s global calibration function obtained by Saul & Bormann (2007). Their difference is nearly one unit at short distances, which can be related to the earthquakes located in subduction zones and plates boundaries used by Saul & Bormann (2007) that systemically have lower stress drops than intraplate earthquakes considered here. Thus it is needed to develop improved region-specific calibration functions for m
B
. However, the difference became smaller at distances greater than 20°. Consequently, this method and new calibration function can be employed to estimate magnitudes as early as possible across Iran plateau.
کلیدواژههای انگلیسی مقاله
MB,Mw,Earthquake Magnitude,calibration,Iran Plateau
نویسندگان مقاله
Mehran Kiani |
Department of Seismology, Institute of Geophysics, University of Tehran, Tehran, Iran. E-mail: mehran.kiani@alumni.ut.ac.ir
Ali Moradi |
Corresponding Author, Department of Seismology, Institute of Geophysics, University of Tehran, Tehran, Iran. E-mail: asmoradi@ut.ac.ir
نشانی اینترنتی
https://jesphys.ut.ac.ir/article_89267_e4f774fb589def729007dce668517973.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات