این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Dental Materials and Techniques، جلد ۱۲، شماره ۲، صفحات ۱۰۴-۱۱۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of different adhesive systems and silane application on shear bond strength of resin cement to indirect restorations
چکیده انگلیسی مقاله Objective: This study compared the influence of various adhesive systems and silane application on the adhesion of resin-based luting cement to lithium disilicate, indirect composite resin, and zirconia restorations.Methods: Lithium disilicate (n=50), indirect composite resin (n=50), and zirconia (n=50) blocks were divided into five groups (n=10), according to the adhesive protocol applied as follows: 1. Optibond XTR, 2. silane + Optibond All in One, 3. One Coat 7 Universal, 4) Adper Scotchbond Multi-Purpose, and 5) Silane + Single Bond Universal. The blocks were bonded to a resin-based luting cement after surface treatments (silica coating and acid application). The bonded specimens were incubated in 37° C water for 24 hours and thermocycled for 5,000 cycles. The shear bond strength (SBS) was evaluated by a universal testing machine. The adhesion protocols for each type of restoration were compared by one-way ANOVA and Dunnett T3 test.Results: There were significant differences in the bond strength of cement to indirect restorations between various adhesive protocols (P< 0.05). In all types of restorations, the highest SBS was observed in group 5, which was silanized and bonded with Single Bond Universal. The bond strength of group 5 in lithium disilicate, indirect composite resin, and zirconia groups were 26.1 ± 4.9 MPa, 20.5 ± 5.7 MPa, and 15.4 ± 4.7 MPa, respectively.Conclusions: It appears that the best adhesive protocol for bonding cement to lithium disilicate, indirect composite resin, and zirconia restorations is the use of silane and a universal adhesive containing silane (Single Bond Universal). (J Dent Mater Tech 2023;12(2): 104-110)
کلیدواژه‌های انگلیسی مقاله Bond Strength, Composite Resin, Lithium disilicate, silane, Zirconia
نویسندگان مقاله | Makbule Heval Şahan
Department of Prosthodontics, School of Dentistry, Ege University, Izmir, Turkey.


| Cem Peşkersoy
Department of Restorative Dentistry, School of Dentistry, Ege University, Izmir, Turkey.


| Övül Kümbüloğlu
Department of Prosthodontics, School of Dentistry, Ege University, Izmir, Turkey.


| Murat Türkün
Department of Restorative Dentistry, School of Dentistry, Ege University, Izmir, Turkey.
نشانی اینترنتی https://jdmt.mums.ac.ir/article_22633.html
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده Original Article
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات