این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
دوشنبه 24 آذر 1404
Analytical and Bioanalytical Electrochemistry
، جلد ۱۵، شماره ۸، صفحات ۶۲۲-۶۳۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
From Mill Scale to Hematite: Processing and Electrophoresis Deposition Coating for Sustainable Secondary Battery Electrodes
چکیده انگلیسی مقاله
Mill scale is a by-product of hot rolling steel generated in a rolling mill and has the potential to be transformed into hematite. Owing to hematite's many uses; mill scale has a high economic value and may be used as a battery anode. The impact of CaCO3 pellet quantity and calcination time on hematite purity, as well as the effect of deposition duration and voltage on coating thickness. The calcination duration has a considerable effect on the purity of the resulting hematite, while the addition of CaCO3 pellets lowered the purity by around 6%. Attaining the thickest hematite coating on an aluminium surface required a 40 V treatment and a deposition time of 30 minutes. Alternately arranged aluminium ions (Al3+) and oxide ions (O2-) form an ionic connection. Whereas aluminium ions on the surface of aluminium are positively charged, oxide ions are negatively charged in order to generate an electrostatic interaction. During the discharge phase, the voltage decreased from 1.02 to 0.70 V. This research contributes to the development of more efficient and effective manufacturing procedures for hematite and its battery anode applications.
کلیدواژههای انگلیسی مقاله
charge-discharge,Cyclic voltammetry,electrophoresis deposition,electrostatic interaction,ionic bonding
نویسندگان مقاله
Marcelinus Christwardana |
Department of Chemistry, Faculty of Science and Mathematics, Diponegoro University, Jl. Jacub Rais, Tembalang, Semarang, Indonesia 50275
Zidane Kurniawan |
Department of Chemical Engineering, Institut Teknologi Indonesia, Jl. Raya Puspiptek Serpong, South Tangerang, Indoensia 15314
Deni Shidqi Khaerudini |
Research Center for Advanced Materials, National Research and Innovation Agency (BRIN), Kawasan Sains Teknologi BJ Habibie, Serpong, South Tangerang, Banten, 15314, Indonesia
نشانی اینترنتی
https://www.abechem.com/article_707323_e7aeeffb2675ff163316f2767724fedc.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات