این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Energy Equipment and Systems، جلد ۹، شماره ۲، صفحات ۱۴۵-۱۵۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel
چکیده انگلیسی مقاله Hot machining is a type of cutting operation that an external heat source is used to pre-heat and consequently reduce the yield strength of the workpiece material. In this study, the conventional and hot turning of AISI630 hardened stainless steel, which is widely used in energy equipment, aerospace, and petrochemical industries, have been evaluated in both numerical and experimental methods. Simulation of the turning process is carried out by finite elements method (FEM) using AdvantEdge software. To predict chip morphology and cutting forces, the 2D and 3D FEM analyses have been used, respectively. The numerical analysis showed that hot turning in 300°C causes a reduction of 28% in cutting forces and consequently decreases stressed on the cutting tool. It is found that the main factor affecting the fluctuations of the cutting forces in turning of hardened AISI630 is the saw-tooth formation phenomenon (chip segmentation) as well as the shear band generation due to thermal softening of the workpiece material. Furthermore, the relation between cutting force fluctuation and the machined surface roughness has been investigated applying numerical analysis and experimental data. The results of roughness measurement revealed that hot turning in 300°C reduces the machined surface roughness up to 23%. In addition, it has been observed that hot turning technique decreases side flow and surface damages in comparison to conventional turning.
کلیدواژه‌های انگلیسی مقاله Hot Turning,Surface roughness,Finite elements method,Cutting Force Fluctuation,Tool Wear
نویسندگان مقاله Mohammadjafar Hadad |
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box 11155/4563, Tehran, Iran

Seyed Mohammad Ebrahimi |
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box 11155/4563, Tehran, Iran

Alireza Araee |
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box 11155/4563, Tehran, Iran

نشانی اینترنتی https://www.energyequipsys.com/article_244288_6866eaf3dce988186bf8480381fa5896.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات