این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Coastal and Offshore Engineering، جلد ۱، شماره ۳، صفحات ۳۵-۴۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Analysis of Band Curvature in Asymmetrical Rolling Process by FEM Method
چکیده انگلیسی مقاله Today, the rolled products, i.e. sheet, plate and foil is used in marine applications, including platforms, hatch covers, mast, hulls of boats and superstructures on pleasure boats and the bridges and superstructures of passenger ships and merchant ships. In this paper, simulation of asymmetric cold rolling is presented by using explicit analysis procedure. In asymmetric cold rolling, the workpiese if often bent downwards or upwards. A two dimensional explicit dynamic finite element model with adaptive meshing technique has been employed to simulate asymmetrical condition are here due to different roll radii. To validate the simulation, the results of simulation and experiment are compared. Effects of asymmetry due to roll radii ratio and speed ratio mismatch on sheet curvature variations are discussed. Finally, optimum roll speed ratio in various of roll radii ratio could be found to produce flat sheet.
کلیدواژه‌های انگلیسی مقاله Asymmetrical rolling,Finite element method,Radii ratio,Speed ratio,Sheet Curvature
نویسندگان مقاله Hassan Sayyaadi |
Ph.D, Sharif University of Technology/ Department of Mechanical Engineering

Ramin Yekta |
M.SC Student, Sharif University of Technology/ Department of Mechanical Engineering

Abolfazl Motekallem |
M.SC Student, Sharif University of Technology/ Department of Mechanical Engineering

نشانی اینترنتی https://www.ijcoe.org/article_149271_46f6c8899b8d81c01aff8e0b50d67bd3.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات