این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۷، شماره ۱، صفحات ۱۳۶-۱۵۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II
چکیده انگلیسی مقاله Adjusting the operating parameters to optimize the performance of the scroll expander has been a hot research topic among scholars. This paper innovatively combines the response surface method and NSGA2 algorithm for parameter optimization. This novel method can accurately predict the optimal operating parameters of the scroll expander and improve the overall efficiency of the scroll expander. Initially, a three-dimensional transient simulation model of the scroll expander was established, and the effects of three key operating parameters (suction pressure, exhaust pressure, and rotational speed) on the output power and isentropic efficiency of the scroll expander were analyzed through numerical simulation. On this basis, the response surface model between the input parameters and the objective function  was established by using the response surface methodology. Consequently, three different optimization algorithms  were compared, and it was found that NSGA-II had a better performance both in terms of convergence and solution performance,. Threfore, the NSGA-II algorithm was used for the multi-objective optimization. Under the premise of considering the maximum output power and isentropic efficiency, based on the established response surface model, the Pareto optimal solution was used to determine the optimal combination of its operating parameters: suction pressure of 1.62 MPa, exhaust pressure of 0.45 MPa, and rotational speed of 2,099.58 rpm.Finally, the numerical model is verified by the laboratory-built test bed of the Organic Rankine cycle low-temperature waste heat oil-free power generation system. The experimental results match well with the numerical simulation results and verify the model accuracy. The results from this pioneering and thorough thr study will provide a solid benchmark for the development and refinement of upcoming scroll machines.
کلیدواژه‌های انگلیسی مقاله Output Power,Isentropic efficiency,Response Surface Methodology,Multi-Objective Optimization
نویسندگان مقاله L. Shi |
School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou, Gansu China

B. Peng |
School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou, Gansu China

نشانی اینترنتی https://www.ije.ir/article_178252_30ed40d4960585541f01c5c04bbf0bee.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات